semi合集-English.pdf - 第6314页

SEMI G61-94 © SEMI 1994 14 Incoming Packages Sam ple Selection Die A ttach Accept Seal Accept Accept Accept Accept Fine, Gross Leak Test Wire Bond Env iron ment al Tests See Section 9. 0 See Section 8. 2.1 See Section 8.…

SEMI G61-94 © SEMI 199413

Pullbac

Pullback

Pullbac

Rundown

Figure 5

Figure 6

NOTE: A geometric symbol used to

indicate lead number 1 indicates

that all leads are isolated from

the die attach

ad.

NOTE: Lead Number 14 is common

to the die attach pad and

indicates the position of lead

number 1.

Figure 7

Figure 8

SEMI G61-94 © SEMI 1994 14

Incoming

Packages

Sample

Selection

Die Attach

Seal

Fine, Gross

Leak Test

Wire Bond

Environmental

Tests

See Section 9.0

See Section 8.2.1

See Section 8.2.2

See Section 8.2.3

See Section 8.2.4

See Section 8.2.5

Figure 9

SEMI G61-94 © SEMI 199415

NOTICE: These standards do not purport to address

safety issues, if any, associated with their use. It is the

responsibility of the user of these standards to establish

appropriate safety and health practices and determine

the applicability of regulatory limitations prior to use.

SEMI makes no warranties or representations as to the

suitability of the standards set forth herein for any

particular application. The determination of the

suitability of the standard is solely the responsibility of

the user. Users are cautioned to refer to manufacturer’s

instructions, product labels, product data sheets, and

other relevant literature respecting any materials

mentioned herein. These standards are subject to

change without notice.

The user’s attention is called to the possibility that

compliance with this standard may require use of

copyrighted material or of an invention covered by

patent rights. By publication of this standard, SEMI

takes no position respecting the validity of any patent

rights or copyrights asserted in connection with any

item mentioned in this standard. Users of this standard

are expressly advised that determination of any such

patent rights or copyrights, and the risk of infringement

of such rights, are entirely their responsibility.

International), 3081 Zanker Road, San Jose, CA 95134. Reproduction o

the contents in whole or in part is forbidden without express written

consent of SEMI.