semi合集-English.pdf - 第7658页
SEMI T6-0697 © SEMI 1997, 2004 11 Segment: BTR Beginni ng Segment for Test Results Level: Heading Loop: _______ Usage: Mandatory Max Use: 1 Purpose: To indicate the beginning of a test results transaction set. Semantic N…
SEMI T6-0697 © SEMI 1997, 2004 10
Transmission Segments and Data Elements:
Segment: ST Transaction Set Header
Level: Heading
Loop: _______
Usage: Mandatory
Max Use: 1
Purpose: To indicate the start of a transaction set and to assign a control number.
Semantic Notes: 1 The transaction set identifier (ST01) used by the translation routines of the interchange partners
to select the appropriate transaction set definition (e.g., 810 selects the invoice transaction set).
Data Element Summary
SEMI USE: Ref. Des. Data Element Name Attributes
M ST01 143 Transaction Set Identifier Code M ID 3/3
Code uniquely identifying a Transaction Set.
863 X12.41 Report of Test Results
M ST02 329 Transaction Set Control Number M AN 4/9
Identifying control number that must be unique within the transaction set functional
group assigned by the originator for a transaction set.
SEMI T6-0697 © SEMI 1997, 2004 11
Segment: BTR Beginning Segment for Test Results
Level: Heading
Loop: _______
Usage: Mandatory
Max Use: 1
Purpose: To indicate the beginning of a test results transaction set.
Semantic Notes: 1 If BTR01 equals 01, 02, 03, 04, 05, 18, or 19, then BTR06 is required to identify the original test
report reference number transmitted.
2 BTR02 is the date that this transaction set was created by the sending party.
3 BTR03 is the time that this transaction set was created by the sending party.
4 BTR05 specifies test results report reference number created by the sending party.
Comments: This segment is used to identify date and purpose of the data transmission.
Data Element Summary
SEMI USE: Ref. Des. Data Element Name Attributes
M BTR01 353 Transaction Set Purpose Code M ID 2/2
Code identifying purpose of transaction set.
00 Original
18 Reissue
M BTR02 373 Date M DT 6/6
Date (YYMMDD).
Seller generated date representing the data collection date or other mutually agreeable
date. Not associated with the lot/date code of the material.
O BTR03 337 Time O TM 4/8
Time expressed in 24-hour clock time as follows: HHMM or HHMMSS, or
HHMMSSD or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S =
integer seconds (00-59) and DD = decimal seconds are expressed as follows: D = tenths
(0-9) and DD = hundredths (00-99).
Seller generated time representing the data collection time or other mutually agreeable
time. Not associated with the lot/date code of the material.
M BTR04 755 Report Type Code O ID 2/2
Code indicating the title or contents of a document, report, or supporting item.
CA Certificate of Analysis
RT Report of Tests and Analysis Report
SR Statistical Report
X BTR05 127 Reference Number O AN 1/30
Reference number or identification number as defined for a particular Transaction Set,
or as specified by the Reference Number Qualifier.
Seller's unique shipment identification code visible on the shipping container and/or
shipping paperwork that identifies the link to the data in a single Transaction Set.
(Examples: Invoice No., Shipper No., Work Order No., etc.)NOTE: In the case of a re-
transmittal (Purpose Code 18, reissue) of previous data due to correction or loss of data,
this data element repeats the information from the prior transmission to be replaced.
O BRT06 127 Reference Number O AN 1/30
Reference number of identification number as defined for a particular Transaction Set,
or as specified by the Reference Number Qualifier.
SEMI T6-0697 © SEMI 1997, 2004 12
Segment: REF Reference Numbers (Order & Material Ident.)
Level: Heading
Loop: _______
Usage: Optional
Max Use: 12
Purpose: To specify identifying numbers.
Syntax Notes: 1 At least one of REF02 or REF03 is required.
Comments: 1 It is recommended for use and for report types CA and RT.
2 BTR03 is the time that this transaction set was created by the sending party.
3 It is not repeated once for each REF01 Qualifier determined by mutual consent between the Buyer
and Seller as required.
Data Element Summary
SEMI USE: Ref. Des. Data Element Name Attributes
M REF01 128 Reference Number Qualifier M ID 2/2
Code qualifying the Reference Number.
BV Purchase Order Line Item Identifier (Buyer)
MF Manufacturer's Part Number (Seller)
PM Part Number (Buyer)
PO Purchase Order Number (Buyer)
PP Purchase Order Revision Number (Buyer)
RE Release Number (Buyer)
S3 Specification Number (Buyer)
SZ Specification Revision (Buyer)
YB Revision Number (Buyer)
ZZ Mutually Defined
X REF02 127 Reference Number X AN 1/30
Reference number or identification number as defined for a particular Transaction Set,
or as specified by the Reference Number Qualifier.
O REF03 352 Description X AN 1/80
A free-form description to clarify the related data elements and their content.