00197674-01-UM-E-Series-EN-05-2015 - 第29页

User manual SIPLACE E 1 Introduction From software version SC 708.0 05/2015 Edition 1.6 SIPLACE Stati on Programming 29 1.6 SIPLACE Station Programming In the SIPLACE Statio n Programming mode, the u ser can create a pla…

1 Introduction User manual SIPLACE E

1.5 Activity levels From software version SC 708.0 05/2015 Edition

1.5 Activity levels

Certain functions or menus may only be executed or accessed. A differentiation is made between

the following activity levels:

– Basic production

– Advanced production

– Machine service

The activity levels Advanced production and Machine service can be password protected.

Basic production 1

This operator level includes those people who have been qualified to operate the machine. These

people are authorized to use any functions associated with operating the machine and may call

up any menus needed to use the machine.

Advanced production 1

This operator level includes those people who have been qualified to programming the machine.

These people are authorized to use any advanced functions (e.g. SIPLACE Station Programming,

manual operations, teaching fiducials).

Machine service 1

Only for qualified personnel. (E.g. setting or changing machine options.)

User manual SIPLACE E 1 Introduction

From software version SC 708.0 05/2015 Edition 1.6 SIPLACE Station Programming

1.6 SIPLACE Station Programming

In the SIPLACE Station Programming mode, the user can create a placement program (PCB,

components, component shapes, setup) directly at the placement machine.

The specified fiducials and placement positions are exactly measured by the PCB camera.

After a local optimizing run, the placement process can be started at the station.

In this case, the placement machine can be used independently without a network connection to

a programming system.

For a manual data exchange, the placement programs can be exported from the placement ma

chine or imported into the placement machine.

In order to implement the station programming mode, the SIPLACE Pro software including the

SQL database is integrated on the station computer. The layout of the SIPLACE Pro GUI has been

adapted to the look and feel of the station software GUI and is displayed as SIPLACE Station Pro

gramming desktop in the station software.

1 Introduction User manual SIPLACE E

1.6 SIPLACE Station Programming From software version SC 708.0 05/2015 Edition

The SIPLACE Station Programming provides the user at the station with all means that are re

quired for a complete description of the placement program.

Fig. 1.6 - 1 SIPLACE Station Programming main view

(1) SIPLACE Station Programming - Job editor

(2) SIPLACE Station Programming - Job control

(3) SIPLACE Station Programming - Teach job

It is possible to work on the description while the placement of another program is still in process.

To ensure an exact specification of the placement positions, fiducials and placement positions can

be taught by the placement machine.

In this process, the semi-transparent outline of the component is displayed above the camera pic

ture taken by the PCB camera. The outline can then be aligned with the contact points on the PCB.

The specified positions can directly be used and saved in the placement program.

Once the PCB is completely described and taught, it can be optimized and produced at the station.

(1)

(2)