YSM40 Mainte_E - 第26页

xxiv Safety instructions 3.4 Label positions T hefollowingwarning/cautionlabelsareattachedtothe Y AMAHAproductstoensuresafeandcorrectuse. Checkthattheinformationoneac hlabelisclearlylegibleandc…

100%1 / 160
xxiii
Safety instructions
Potential
hazard
Could cause machine damage (collisions with head, etc.).
To avoid
hazard
Verify that no objects have been placed on the batch change carrier's (for YSM40 and Z:LEX (YSM20))
top cover.
Applicable
machines
Batch change carrier (YSM40, Z:LEX (YSM20))
Case
Setup
Potential
hazard
Could cause machine damage (collisions with head, etc.).
To avoid
hazard
Verify that no objects have been placed on the batch change carrier's (for YSM40 and Z:LEX (YSM20))
top cover.
Applicable
machines
Batch change carrier (YSM40, Z:LEX (YSM20))
Case
Setup
xxiv
Safety instructions
3.4 Label positions
Thefollowingwarning/cautionlabelsareattachedtotheYAMAHAproductstoensuresafeandcorrectuse.
Checkthattheinformationoneachlabelisclearlylegibleandcomplywiththeinstructions.
Forsafetyprecautionsotherthanthoseonthelabelsshowninthissection,seetheinstructionsin"1.Safety".
n
NOTE
Basically, labels are attached to the positions shown below, although they may differ slightly depending on the
machine model.
n
NOTE
When connecting power to this equipment, refer to "Power connection terminals" described in the appendix of the
maintenance manual or user's manual.
Warning/caution labels
Front
■ Top of cutter slope
■ Top of cutter slope
■ Open/close cover
(front and rear sides)
■ Open/close cover inner side
(front and rear sides)
■ Open/close cover
(front and rear sides)
■ At panel
■ Feeder setup section
(front and rear sides)
■ Panel inner side
■ Cutter section
■ Cutter section
■ Conveyor opening
(front and rear sides,
right and left sides)
■ Main switch
93201-N5-10
xxv
Safety instructions
n
Label positions
Warning/caution labels
Rear
■ Conveyor opening
(front and rear sides,
right and left sides)
■ Panel inner side
■ Top of cutter slope
■ Top of cutter slope
■ Feeder setup section
(front and rear sides)
■ Open/close cover
(front and rear sides)
■ Open/close cover
(front and rear sides)
■ Open/close cover inner side
(front and rear sides)
■ Cutter section
■ Cutter section
93202-N5-10