YSM40 Mainte_E - 第43页
1-4 1 Maintenance its removal procedure (describ ed above). 2.2 Consumable par ts T heterm"consumableparts"inthismanualindicatespartssubjecttocontinualwearduringusecausing graduallossoffuncti…
1-3
1
Maintenance
2. Preparing for maintenance tasks
Tasks described in this section focus mainly on replacing parts (consumable parts) that might cause a gradual
loss of machine functions during use. This section also describes how the user can easily replace parts when
a breakdown occurs.
2.1 Removing the tape cutter duct
Thetapecutterductcanberemovedbothformaintenanceproceduresandfacilitatingaccessintothemachine
interior.Theductremovalprocedureisgivenbelow.
1
Loosen the duct securing screws.
Use a Phillips screwdriver to loosen the 4
duct securing screws as shown in the figure
at right.
n
NOTE
Do not completely remove the duct securing screws.
The duct can be removed simply by partially loosening
the screws.
Use a Phillips screwdriver with a shaft length longer than
100mm.
53100-N5-00
2
Remove the duct.
As shown in the figure at right, slide the duct
downward first, then detach the rear hooks
to remove the duct.
c
below.
53101-N5-00
3
Reattach the duct.
After the maintenance work, etc. has been
completed, reattach the duct by reversing
Remove the duct
Step 2
Duct
Duct securing screw
position (notched)
Hook
Loosening the duct securing screws
Step 1
Duct securing screws
(4 screws)
Phillips screwdriver
Longer than 100mm
1-4
1
Maintenance
its removal procedure (described above).
2.2 Consumable parts
Theterm"consumableparts"inthismanualindicatespartssubjecttocontinualwearduringusecausing
graduallossoffunctions.Thefollowingpartsareclassifiedinthismanualasconsumablepartsandshouldbe
replacedasneededduringmaintenance.
2.2.1 MU head unit
n
Consumable parts (parts supplied with machine)
Consumable parts (MU head)
Parts supplied with machine
Air filter
Nozzle leaf spring
Nozzle leaf mounting screw
53102-N5-00
Product Name Parts List Designation Parts No. Note
Nozzle leaf spring LEAF SPRING KG7-M7137-A0X
Nozzle leaf spring mounting screw
SCREW, PAN HEAD 90990-08J016 M2 × L2.5
Air filter FILTER KLF-M7156-00X
c
The part Nos. given in this manual are the original part Nos. which were assigned to the parts when this manual was
1-5
1
Maintenance
ordering parts.
n
Consumable parts (optional parts)
Product Name Parts List Designation Parts No. Note
Standard 50X
Group nozzles
NOZZLE, 500A/510A ASSY KLF-M87A0-A0X 0402 dedicated
NOZZLE, 501A ASSY. KLF-M7710-A0X 0603, 1005
NOZZLE, 502A ASSY. KLF-M7720-A0X 1608, 2012, 3216
NOZZLE, 503A/514A ASSY. KLF-M8740-A0X SOP, etc.
Narrow-pitch 51X
Group nozzles
NOZZLE, 500A/510A ASSY KLF-M87A0-A0X 0402 dedicated
NOZZLE, 511A ASSY. KLF-M8710-A0X 0603 dedicated
NOZZLE, 512A ASSY. KLF-M8720-A0X 1005, 1608
NOZZLE, 513A ASSY. KLF-M8730-A0X 2012, 3216, 3225
Standard &
narrow-pitch
Common nozzles
NOZZLE, 504A/515A ASSY. KLF-M8750-A0X QFP, PLCC, etc.
NOZZLE, 507A/518A ASSY. KLF-M8780-A0X
32mm or larger, large
components
NOZZLE, 506A/517A ASSY. KLF-M8770-A0X Cylindrical components
Other
BODY, NOZZLE 500/510 KLF-M87A1-00X For 510A Nozzle tip only
BODY, NOZZLE 511 KLF-M8711-00X For 511A Nozzle tip only
BODY, NOZZLE 512 KLF-M8721-00X For 512A Nozzle tip only
BODY, NOZZLE 513 KLF-M8731-01X For 513A Nozzle tip only
BODY, NOZZLE 501 KLF-M7711-00X For 501A Nozzle tip only
BODY, NOZZLE 502 KLF-M7721-00X For 502A Nozzle tip only
BODY, NOZZLE 303/314 KHY-M7741-00X For 503A / 514A Nozzle tip only
BODY, NOZZLE 306/317 KHY-M7771-00X For 506A / 517A Nozzle tip only
SPRING,NOZZLE KLF-M7713-00X For chip nozzles
SPRING KHN-M7713-000 For 503 / 514A, 506 / 517A
PIN KHN-M7714-000 For 503 / 514A, 506 / 517A
CLIP KHN-M7715-001 For 503 / 514A, 506 / 517A
O-RING 90990-17J013 For 504A / 515A
O-RING 90990-17J014 For 507A / 518A
c
The part Nos. given in this manual are the original part Nos. which were assigned to the parts when this manual was
ordering parts.