4OM-996-007 - 第190页
Check Code Display Section A Display Section B 801001 Auto Of fset T each Auto offset teach mode start.(this prcs. Completed) Information 801002 Auto Offset T each Nozzle offset error . Information 801003 Auto Offset T e…
Check Code Display Section A Display Section B
800D08 Maintenance Keep the machine condition.(maintenance cycle time : Upkeep-
Warning Checkup/Nozzle)
800D09 Maintenance Keep the machine condition.(maintenance cycle time : Upkeep-
Warning Checkup/Filter #1)
800D0A Maintenance Keep the machine condition.(maintenance cycle time : Upkeep-
Warning Checkup/Filter #2)
800D0B Maintenance Keep the machine condition.(maintenance cycle time : Designate-
Warning Checkup/Item #1)
800A0C Maintenance Keep the machine condition.(maintenance cycle time : Designate-
Warning Checkup/Item #2)
800D0D Maintenance Keep the machine condition.(maintenance cycle time : Designate-
Warning Checkup/Item #3)
800D0E Maintenance Component box fill up warning.(notice count over)
Warning
(Contents) Self-Diagnostics Error Message
(Description) Follow the displayed instructions for maintenance work.
800E01 Program Change Check the setup of machine.(program change completed)
Warning
800E02 Program Change "Check the setup of machine.(Program change completed. Run
Warning Mode changed to "PASS".)"
800F01 SIF Information The fdr.was not recorded SIF data exists. Please record by
mnl.operation.
800F02 SIF Information The SIF data was changed. Please record by mnl.operation.
800F03 SIF Information The fdr. was not recorded SIF data exists.
Please record by mnl.operation.
800F04 SIF Information The fdr.was not recorded SIF data exists.
800F05 SIF Information "Performing this operation may cause unrecorded SIF data lost.
Press Enable SW during lit, if continue."
800F06 SIF Information Changing the feeder alternate condition to 'Disable' for SIF found
empty feeder.
800F07 SIF Information Changing the feeder alternate condition to 'Disable' for SIF found
missing feeder.
(Contents) Self-Diagnostics Error Message
(Description) Confirm the displayed contents.
0509-002 2-18 AIM01ETRP
1.3 Machine lnformation
Check Code Display Section A Display Section B
801001 Auto Offset Teach Auto offset teach mode start.(this prcs. Completed)
Information
801002 Auto Offset Teach Nozzle offset error.
Information
801003 Auto Offset Teach Nozzle Dirt Detection. If dirt has adhered, there is a possibility
Information that it may become impossible to recognize. Please remove the
ring lighting glass upper surface, a diffusion board, and the dirt
adhering to the nozzle.
801004 Auto Offset Teach Gain Level Teach Error.
Information
801005 Auto Offset Teach "Camera Dirt Detection. If dirt has adhered, there is a possibility
Information that it may become impossible to recognize.
Please remove the ring lighting glass upper surface, a diffusion
board, and the dirt adhering to the nozzle."
801006 Auto Offset Teach Nozzle center error.
Information
801007 Auto Offset Teach Nozzle origin error.
Information
801008 Auto Offset Teach Nozzle Posture Level
Information
801101 Feeder Carriage Return to order of priority carriage.
Priority Mode
801201 Stat Auto Head Cpu Communication error occurred.(CPU2-CPU3)
Recovery
801202 Stat Auto Head Head cam origin return action not complete.(Not CAM ORIGIN
Recovery position)
801203 Stat Auto Head Head Driver communication is time out.(from cpu3 job)
Recovery
801204 Stat Auto Head Nozzle change action not complete.(cam lock action NG)
Recovery
801205 Stat Auto Head Head cam position return action not complete.
Recovery
801206 Stat Auto Head Nozzle change action not complete.(cam free action NG)
Recovery
801207 Stat Auto Head Nozzle change action not complete.(Not CAM ORIGIN position)
Recovery
(Contents) Self-Diagnostics Error Message
(Description) Confirm the displayed contents.
0509-001 2-18-1 AIM01ETRP
1.3 Machine lnformation
Check Code Display Section A Display Section B
801208 Stat Auto Head Unselected Nozzle Drop.
Recovery
801209 Stat Auto Head Component output error(Pickup error) is detected by nozzle level
Recovery was position. ;Nozzle posture detection
80120a Stat Auto Head The selected nozzle was not at position. ;Nozzle posture detec-
Recovery tion
80120b Stat Auto Head Component output error(Others) is detected by nozzle level was
Recovery position. ;Nozzle posture detection
(Contents) Self-Diagnostics Error Message
(Description) Confirm the displayed contents.
801301 Pickup Position Feedback value out of range.
Feedback Please check feeder.
801401 Pickup Level Data Calculated data out of range.
Please check library data and offset data.
801402 Placement Level Calculated data out of range.
Data Please check library data and offset data.
801501 Feeder Index Production operation was interrupted in the middle of feeder index
Position operation. Please check a position.
801502 Feeder Index The feeder carriage was returned to the home position in the middle
Position of feeder index operation.
Please check a feeder index position.
801601 Product Restart Restart production with semi-auto(after specified step) mode.
801602 Product Restart Restart production with warm start mode.
801603 Product Restart Restart production with warm start mode after EMER stop. Ma-
chine will stop after placement complete. Please confirm PCB af-
terward.
(Contents) Self-Diagnostics Error Message
(Description) Confirm the displayed contents.
0509-002 2-19 AIM01ETRP
1.3 Machine lnformation