4OM-996-007 - 第370页

Recognition Error ID Recognition Error Contents, Cause, and Remedy 0139213005 "Lead T ype No." in "Lead Group 1" is improper . 0139213006 "Lead T ype No." in "Lead Group 2" is impr…

100%1 / 417
Recognition Error ID Recognition Error Contents, Cause, and Remedy
0139211001 An improper parameter is specified as "Component shape".
0139211002 "Mold Size Tolerance X" is larger than "Mold Size X".
0139211003 "Mold Size Tolerance Y" is larger than "Mold Size Y".
0139211004 "Outward Length Tolerances" are larger than "Outward Length".
0139211005 A front reverse side judging cannot be carried out by this component size or the
lighting pattern.
0139212001 The total of "Corner 1 Dim X" and "Corner 4 Dim X" is larger than "Mold Size X".
0139212002 The total of "Corner 1 Dim Y" and "Corner 2 Dim Y" is larger than "Mold Size Y".
0139212003 The total of "Corner 2 Dim X" and "Corner 3 Dim X" is larger than "Mold Size X".
0139212004 The total of "Corner 3 Dim Y" and "Corner 4 Dim Y" is larger than "Mold Size Y".
0139212005 "Electrode Size" is larger than half of "Mold Size X".
0139212006 # of Linear Edges is improper.
0139213001 "# of Types" (lead data) is improper.
0139213002 "# of Groups" (lead data) is improper.
0139213003 The total of "# of Leads" (lead data) is too small.
0139213004 "No Detection" is set in all "Insp Condtn" text boxes.
(Cause) Wrong parameters are set.
(Remedy) Set correct parameters.
4.3 Recognition Error IDs and Remedial Procedures
0509-002 2-185 AIM01ETRP
Recognition Error ID Recognition Error Contents, Cause, and Remedy
0139213005 "Lead Type No." in "Lead Group 1" is improper.
0139213006 "Lead Type No." in "Lead Group 2" is improper.
0139213007 "Lead Type No." in "Lead Group 3" is improper.
0139213008 "Lead Type No." in "Lead Group 4" is improper
0139213009 "Lead Type No." in "Lead Group 5" is improper.
0139213010 "Lead Type No." in "Lead Group 6" is improper.
0139213011 "Lead Type No." in "Lead Group 7" is improper.
0139213012 "Lead Type No." in "Lead Group 8" is improper.
0139213013 "Lead Pitch" in "Lead Group 1" is smaller than "Lead Width".
0139213014 "Lead Pitch" in "Lead Group 2" is smaller than "Lead Width".
0139213015 "Lead Pitch" in "Lead Group 3" is smaller than "Lead Width".
0139213016 "Lead Pitch" in "Lead Group 4" is smaller than "Lead Width".
0139213017 "Lead Pitch" in "Lead Group 5" is smaller than "Lead Width".
0139213018 "Lead Pitch" in "Lead Group 6" is smaller than "Lead Width".
0139213019 "Lead Pitch" in "Lead Group 7" is smaller than "Lead Width".
0139213020 "Lead Pitch" in "Lead Group 8" is smaller than "Lead Width".
(Cause) Wrong parameters are set.
(Remedy) Set correct parameters.
4.3 Recognition Error IDs and Remedial Procedures
0509-002 2-186 AIM01ETRP
Recognition Error ID Recognition Error Contents, Cause, and Remedy
0139213021 "Missing Lead Start" in "Lead Group 1" is too large.
0139213022 "Missing Lead Start" in "Lead Group 2" is too large.
0139213023 "Missing Lead Start" in "Lead Group 3" is too large.
0139213024 "Missing Lead Start" in "Lead Group 4" is too large.
0139213025 "Missing Lead Start" in "Lead Group 5" is too large.
. 0139213026 "Missing Lead Start" in "Lead Group 6" is too large.
0139213027 "Missing Lead Start" in "Lead Group 7" is too large.
. 0139213028 "Missing Lead Start" in "Lead Group 8" is too large.
0139213029 "Full Length" in "Lead Type 1" is smaller than "Lead Length".
0139213030 "Full Length" in "Lead Type 2" is smaller than "Lead Length".
0139213031 "Full Length" in "Lead Type 3" is smaller than "Lead Length".
0139213032 "Full Length" in "Lead Type 4" is smaller than "Lead Length".
0139213033 "Lead Width" and "Full Length" in "Lead Type 1" are not equal.
0139213034 "Lead Width" and "Full Length" in "Lead Type 2" are not equal.
0139213035 "Lead Width" and "Full Length" in "Lead Type 3" are not equal.
0139213036 "Lead Width" and "Full Length" in "Lead Type 4" are not equal
(Cause) Wrong parameters are set.
(Remedy) Set correct parameters.
4.3 Recognition Error IDs and Remedial Procedures
0509-002 2-187 AIM01ETRP