4OM-996-007 - 第90页

0509-002 1-27 AIM01ETRP 1.3 Maintenance Spots Linear Scale Linear Scale/Encoder Head 3M7-2 Every 3 Months Cleaning Clean the linear scales and encoder heads every three months or every time the linear guides are lubricat…

(13) Feeder Carriage Section

1.3 Maintenance Spots

0509-003 1-26 AIM01ETRP

Fig. 4A28 Top View of Machine

• Do not bring any metal of high magnetizability close

to this. Otherwise, such metal will easily be magne-

tized and attracted, causing an injury to the opera-

tor and/or a mechanical breakdown.

• Do not bring any magnetizable material close to this.

Those who wear implanted pacemakers should not

work inside the machine. Otherwise, the pacemaker

may be affected by magnetism, leading to a serious

accident.

CAUTION

WARNING

Linear Guide Rails 1M13

Every Month Cleaning

Clean the carriage with an oiled rag.

Yoke Sides of Linear Motors 1M13-1

Every Month Inspection/Cleaning

Check for components and/or foreign substances

adhered to the yoke sides of the linear motors. If neces-

sary, clean the yoke sides with a rag.

Refer to "1.4.11 Cleaning of Linear Motor's Yoke Sides"

for details.

0509-002 1-27 AIM01ETRP

1.3 Maintenance Spots

Linear Scale

Linear Scale/Encoder Head 3M7-2

Every 3 Months Cleaning

Clean the linear scales and encoder heads every three months or every time the linear guides are

lubricated.

Refer to "1.4.10 Cleaning of Linear Scale Sections" for details.

Encoder Head

Fig. 4A28-1 Front View of Machine

Fig. 4A29 Front View of Machine

1.3 Maintenance Spots

0509-003 1-28 AIM01ETRP

Grease Nipples

Magnified View of Feeder Carriage

Slide Block of Linear Guide

Slide Block of Linear Guide (Front Side) 6M4

Every 6 Months Lubrication (DAPHNE EPONEX GREASE No. 1)

Grease should be applied every 6 months after the initial month.

* Use the FL- and P-type or the U- and P-type attachments.

Refer to "1.4.9 Lubrication of Linear Guide in Feeder Carriage Section" for details.

P Type

FL Type U Type