4OM-996-007 - 第93页

Stopper Face 1M16 Every Month Lubrication (MOL YNOC GREASE AP1) Apply the grease by hand or using a brush. Cylinder Fulcrum 1M17 Every Month Lubrication (MOL YNOC GREASE AP1) Inject grease from the grease nipple with a g…

100%1 / 417
Fig. 4A32 Rear View of Machine
1.3 Maintenance Spots
0509-002 1-29 AIM01ETRP
Grease Nipples
Magnified View of Feeder Carriage
Slide Block of Linear Guide
Slide Block of Linear Guide (Rear Side) 6M5
Every 6 Months Lubrication (DAPHNE EPONEX GREASE No. 1)
Grease should be applied every 6 months after the initial month.
* Use the FL- and P-type or the U- and P-type attachments.
Refer to "1.4.9 Lubrication of Linear Guide in Feeder Carriage Section" for details.
P TypeFL Type U Type
Stopper Face 1M16
Every Month Lubrication
(MOLYNOC GREASE AP1)
Apply the grease by hand or using a brush.
Cylinder Fulcrum 1M17
Every Month Lubrication (MOLYNOC GREASE AP1)
Inject grease from the grease nipple with a grease gun.
* Use the U- and N-type attachments.
Oil Outlet
U Type N Type
Rod End 3M8
Every-3-Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Inject new grease from the grease nipple with a
grease gun.
* Use the U- and L-type or the U- and V-type
attachments.
U Type L Type V Type
(14) Placement Change Correction Section
(15) Nozzle Change Section
1.3 Maintenance Spots
Cam Switchover Surfaces 1M14
Every Month Lubrication (MOLYNOC GREASE AP1)
Apply the grease to both surfaces by hand or using a brush.
Cylinder Fulcrum
Every Month Lubrication
(MOLYNOC GREASE AP1)
Inject grease from the grease nipple with a grease gun.
* Use the U- and N-type or the U- and S-type
attachments.
1M15
U Type N Type S Type
Fig. 4A35 Front View of Machine
Fig. 4A36 Front View of Machine
0509-002 1-30
AIM01ETRP
(16) Nozzle Change/Return Section
1.3 Maintenance Spots
Rod End 3M9
Every 3 Months Lubrication (DAPHNE EPONEX GREASE No. 1)
Inject grease from the grease nipple with a grease gun.
* Use U- and L-type or U- and V-type attachments.
Cam Box Oil Outlet
Cam Box 1Y3
Yearly Lubrication (SYNTHESO HT220)
Change the oil with new one after initial 500 hours
and every 6,000 hours for subsequent use.
The proper amount of oil is equivalent to "1/2" of the
oil gauge. (Approx. 2.2 liters)
Note: Do not apply air pressure to the internal area
of the cam box while discharging the oil.
U Type L Type V Type
Cylinder Fulcrum 1M19
Every Month Lubrication
(MOLYNOC GREASE AP1)
Inject grease from the grease nipple with a grease
gun.
* Use the U- and N-type attachments.
U Type
N Type
Stopper Face 1M18
Every Month Lubrication
(MOLYNOC GREASE AP1)
Apply the grease by hand or using a brush.
Fig. 4A37
Rear View of Machine
0509-002 1-31
AIM01ETRP