00195377-0102 - 第30页

Retrofit instructions: Flexible dual conveyo r, SIPLACE D4 04/2007 Edition 30 PLEASE NOTE : Setting the fixed conveyor rail is nor mally not required unless the fixed conveyor rail was moved during service work befor e. …

Retrofit instructions: Flexible dual conveyor, SIPLACE D4

04/2007 Edition

: Screw the fixing blocks with the hexagonal shafts to the sides in the conveyor area and to the

separating layers in the extension kits.

Fixing blocks

Retrofit instructions: Flexible dual conveyor, SIPLACE D4

04/2007 Edition

PLEASE NOTE:

Setting the fixed conveyor rail is normally not required unless the fixed conveyor rail was moved

during service work before.

: Fit the conveyor rail limit switch on the input side (see illustration, page 24).

: Fit the video multiplexer.

: Fit all four doors to the extension kit.

: Attach the middle protective covers over the conveyor.

: Switch the placement machine on at the main switch.

: Position conveyor rail 1 (conveyor rail 4 for the fixed side on the left) using the width adjustment

(SITEST) and the "Conveyor fixed side panel, setup gauge, DC/SC HS60/D4 (item no.:

03054247-) step by step at the width of 30.5 mm.

Fig. 2.4.1 Setting for the "Fixed conveyor rail" HS-60, D4

Dual conveyor

Conveyor rails

T ra ck 2 T rack 1

S h aft m ou n

Direction of PCB transport

Screw to loosen the

fixed rail

movable

fixe d

30.5mm

25 1 .7 m m

Shaft

Gauge

Fixed conveyor rail

Retrofit instructions: Flexible dual conveyor, SIPLACE D4

04/2007 Edition

: Change to SITEST (level Service) to the menu "transport 1 options and configuration => refe-

rence position fixed rail => teach => step by step 100µm".

The adjustment units connect.

This function can only be carried out, when you have logged in via the Service engineer (SIPLACE)

operator level. 2

: Lay the gauge into the input conveyor between transport rail and mounting flange of the trans-

port tray. Control the value 30,5 with the gauge. The straightness and parallelity is guaranteed

by the adjustment units.

: Save the positions of the fixed conveyor rail.

: In addition, you can secure this conveyor rail using the stop ring (illustration, page 10).

Stop ring