4OM-1505-004_w.pdf - 第121页

4OM-1505 2-6 2. T roubleshooting on Each Section : Chap.2 2.2 T roubleshooting after Error Display Assuming "ID/ITEM/CONTENT" in the "ERROR" window as an index, the system retrieves the related page o…

100%1 / 181
4OM-1505
2-5
2. Troubleshooting on Each Section : Chap.2
2.1.2 No Display on Touch Screen
T4B3
Symptom Nothing is displayed on the touch screen.
Cause (Cause 1) The screen saver function is activated.
(Cause 2) Power is not supplied from the source.
Remedy (Remedy 1) Touc
h a part of the touch screen. The foreground activities will occur
in any running application.
(Remedy 2) Refer to "2.1.1 Power Operation Impossible" and follow the remedial
procedure.
0906-001
4OM-1505
2-6
2. Troubleshooting on Each Section : Chap.2
2.2 Troubleshooting after Error Display
Assuming "ID/ITEM/CONTENT" in the "ERROR" window as an index, the
system retrieves the related page of the instruction manual.
Refer to "2.2.1 Typical Description" for the detailed description.
F4B4 Example of "ERROR" Window
0906-001
4OM-1505
2-7
2. Troubleshooting on Each Section : Chap.2
2.2.1 Typical Description
T4B4
Error ID Error Name, Description, Cause, and Remedy
0101000 Table-X Origin
Zeroing opn. was incompleted, within specied time.
(Cause 1) Dirt adheres to the sensor and the optical beam is shielded.
(Cause 2) The sensor is defective.
(Cause 3) The
driver is malfunctioning or an error has occurred during communication with
the host CPU.
(Remedy 1) Wipe off dirt on the sensor and zero Table X again.
(Remedy 2)
It is required to replace the sensor with a new one. Contact our service
personnel for details.
(Remedy 3) Shut down the power of the machine once and power up the machine again.
After that, zero Table X. If this operation does not reset the machine to its
normal condition, the driver may be defective. Contact our service personnel
for details.
0102000 Table-X Origin
Detect lost pulse error.
(Cause 1)
(Remedy 1)
(Continued to the next page)
[1] The error IDs (IDs displayed in the "ERROR" window) are described in the
numerical order.
[2] Described are the classication (item) and the description in the "ERROR"
window.
[3] Described are the causes and remedial procedures of the errors in
"(Classication and Explanation)".
The causes and remedies are correlated as follows.
(Cause 1) → (Remedy 1)
(Cause 2) → (Remedy 2)
(Cause 3) → (Remedy 3)
[4] This indicates that the related contents are described subsequently on the
next page.
0906-001
[1]
[3]
[4]
[2]