4OM-1505-004_w.pdf - 第54页

4OM-1505 1-3 1. Outline of Maintenance : Chap.1 • V acuum Cleaner If the suction hole of the vacuum cleaner is changed to a smaller one, some spots can be cleaned more easily . • Air Blow Brush for Camera Use one on the …

100%1 / 181
4OM-1505
1-2
1. Outline of Maintenance : Chap.1
1.2 Preparation for Maintenance
1.2.1 Preparation for Cleaning
Prepare the following items.
•
Brush
Use a brush whose bristles do not come off if possible.
•
Rag (a waste piece of cloth)
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
A clean rag is also required, depending on the spots to be cleaned.
Notice
The remaining waste thread if any will cause the machine to break
down.
•
Oiled Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Too much grease should not be applied and any different type of grease should
not be mixed into the specied one.
Notice
The remaining waste thread if any will cause the machine to break
down.
•
Air Gun
Do not use the air gun for any spots other than the specied ones.
If dirt and dust are dispersed, they may adhere to the sensors and moving
mechanisms, causing the machine to break down.
F4A1 Air Gun
0906-001
4OM-1505
1-3
1. Outline of Maintenance : Chap.1
•
Vacuum Cleaner
If the suction hole of the vacuum cleaner is changed to a smaller one, some
spots can be cleaned more easily.
•
Air Blow Brush for Camera
Use one on the market.
•
Container
, etc.
Use a container big enough to hold water drained from the air regulator while
cleaning the regulator.
•
Industrial
Alcohol
Use the industrial alcohol described in T4A1 for this machine.
Maker Product Name
DAN Chemical Co., Ltd Denatured Ethanol AP-7
Nihon Alcohol Hanbai Co., Ltd SOLMIX AP-7
T4A1
When the industrial alcohol in T4A1 is unavailable, follow the mixture ratio in
T4A2.
Chemical Element CAS No. Mixture Ratio
Ethyl Alcohol 64-17-5 80 to 90 %
Normal Propanol 71-23-8 5 to 10 %
Isopropyl Alcohol 67-63-0 5 % or less
T4A2
Obtain the material safety data sheet (MSDS) from the maker to learn the
precautionary points on handling and check the contents described in detail for
correct use.
0906-001
4OM-1505
1-4
1. Outline of Maintenance : Chap.1
1.2.2 Preparation for Lubrication
Prepare for the specied types of grease and lubrication tools.
Specied Greases
•
DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSA
N)
•
MOLYNOC GREASE
AP1 (NIPPON OIL CORPORATION)
Note
(a) Before lubrication, wipe off old grease. Otherwise, the effect of grease and
oil will decrease.
(b) Obtain the material safety data sheet (MSDS) from the maker to learn the
precautionary points on handling and check the contents described in detail
for correct use.
Same Types of Lubricants
•
Lubricants equivalent to DAPHNE EPONEX GREASE No. 1 (IDEMITSU
KOSAN)
Grease Names Makers
Alvania Grease No. 1 Showa Shell Sekiyu K.K
Multinoc Grease No. 1 NIPPON OIL CORPORATION
Jomo Lisonix Grease No. 1 JAPAN ENERGY CORPORATION
Dynamax No. 1 COSMO OIL LUBRICANTS
Lithtan 1 ESSO OIL
MP Grease No. 1 KYGNUS
Gemico MP-1 Tonen General Sekiyu K.K
Multemp PS1 KYODOH YUSHI CO., LTD.
T4A3
•
Lubricants equivalent to MOLYNOC Grease AP1 (NIPPON OIL
CORPORATION)
Grease Names Makers
DAPHNE Grease M No. 1 IDEMITSU KOSAN
Jomo Lisonix Grease M-No. 1 JAPAN ENERGY CORPORATION
Jomo Lisonix Grease M-No. 1 COSMO OIL LUBRICANTS
BEACON Q2 ESSO OIL
Gemico MD2 TonenGeneral Sekiyu K.K.
M5 GREASE 1 KYGNUS
T4A4
0906-001