4OM-1505-004_w.pdf - 第83页

4OM-1505 1-32 3. Maintenance Spots : Chap.1 3.2.7 T able Section T able X-Axis Ball Screw Move the table Z axis up to the printing position. Detach the cover located in front of the table. Apply grease to the X-axis ball…

100%1 / 181
4OM-1505
1-31
3. Maintenance Spots : Chap.1
Linear Guide for Chute Width
Adjustment (Right Side)
Every 5 years Lubrication
Linear Guide for Chute Width
Adjustment (Left Side)
Every 5 years Lubrication
Linear Guide for Chute Width
Adjustment (Right Side)
Every Month Cleaning
Clean the stopper with an oiled rag.
Do not leave any waste
threads after cleaning.
Linear Guide for Chute Width
Adjustment (Left Side)
Every Month Cleaning
Clean the stopper with an oiled rag.
Do not leave any waste
threads after cleaning.
Right Side
Left Side
Note
(1)
(2)
Move up the backup table
Z axis.
Apply grease with a brush or
a spatula.
Torapezoid Screw for Chute Width
Change
(Left Side), (Right Side)
Every 6 Months Lubrication
(1)
(2)
Move up the backup table
Z axis.
Apply grease with a brush or
a spatula.
(1)
(2)
Move up the backup table
Z axis.
Apply grease with a brush or
a spatula.
Note
F4A21
0906-001
4OM-1505
1-32
3. Maintenance Spots : Chap.1
3.2.7 Table Section
Table X-Axis Ball Screw
Move the table Z axis up to
the printing position.
Detach the cover located in
front of the table.
Apply grease to the X-axis
ball screw with a brush or a
spatula.
Every 6 Months Lubrication
(1)
(2)
(3)
F4A23
0906-001
4OM-1505
1-33
3. Maintenance Spots : Chap.1
Table Z-Axis Ball Screw
Every 6 Months Lubrication
Every 6 Months Lubrication
Table Z-Axis Guide Bushing
Table Z-Axis Guide Bushing
Every Month Cleaning
Clean the stopper with an oiled rag.
Do not leave any waste
threads after cleaning.
Note
Move the table Z axis up to
the printing position.
Detach the cover located in
front of the table.
Apply grease to the X-axis
ball screw with a brush or a
spatula.
(1)
(2)
(3)
Move the table Z axis up to
the printing position.
Detach the cover located in
front of the table.
Apply grease to the X-axis
ball screw with a brush or a
spatula.
(1)
(2)
(3)
F4A24
0906-001