4OM-1505-004_w.pdf - 第87页
4OM-1505 1-36 3. Maintenance Spots : Chap.1 3.2.8 Cleaning Section Hose Joint When the industrial alcohol (solvent) is leaking, remove the bolt and wipe off the alcohol with a rag. If loosened, tighten it after removing …
4OM-1505
1-35
3. Maintenance Spots : Chap.1
Table X-Axis Linear Guide
(Left Side), (Right Side)
Every 5 years Lubrication
Inject new grease from the grease
nipple with a brush or a grease
gun.
Use the U- and P-type
attachments.
Front Side
Note
F4A26
Table X-Axis Linear Guide
Every 6 Months Lubrication
(Left Side)
Use SPK-3C attachment.
Inject new grease from the grease
nipple with a brush or a grease
gun.
Clean the stopper with an oiled
rag.
Every Month Cleaning
Table X-Axis Linear Guide
Do not leave any waste
threads after cleaning.
(Right Side)
Rear Left Side
Rear Right Side
Note
Note
F4A27
0906-001
4OM-1505
1-36
3. Maintenance Spots : Chap.1
3.2.8 Cleaning Section
Hose Joint
When the industrial alcohol (solvent)
is leaking, remove the bolt and wipe
off the alcohol with a rag.
If loosened, tighten it after removing
the bolt once.
Every Day Cleaning
Hose Joint
Confirm that the industrial alcohol
(solvent) is not leaking and the bolt is
not loosened with a mirror.
And also, check the joints and the
packing.
Every Day Check
Cleaning Nozzle
Every Month Cleaning
Remove solder paste and dust using
a cloth soaked in industrial alcohol.
In the case that solder paste can not
be removed, scrape it and clean it
again using a cloth soaked in industrial
alcohol.
F4A28
0906-001
4OM-1505
1-37
3. Maintenance Spots : Chap.1
Solvent Tank, Solvent Pan,
and Hose Joint
Check if industrial alcohol is leaking
or not.
If leakage is found, wipe off the alcohol
with a rag.
Check the joint and packing.
Every Day Check and Cleaning
Solvent Tank and Pan
F4A29
0906-001