xp141-241-341-5.0E - 第5页
FK-9F98-29 XP Series Training Text for Service Engineers Edition 5.0 About this Manual Fuji Machine Mfg. Co., Ltd. Okazaki SMT Eq uipment Quality Assurance Dept. CS Section iii Page number A two digit hyphenated number a…
FK-9F98-29 XP Series Training Text for Service Engineers
Edition 5.0 About this Manual
Fuji Machine Mfg. Co., Ltd. Okazaki
SMT Equipment Quality Assurance Dept.
CS Section
ii
Page Layout
Each page indicates the chapter number and title, section number, body, manual name,
page number and edition number.
Chapter number
The chapter number to which each section belongs is shown in the header on each page.
The manual is made up of 16 chapters as detailed earlier in this section.
Section number and title
The title of each chapter is shown in the header on each page. Each part may contain one
or more sections.
Section title
Each chapter may be divided into several sections. The section number is composed of the
number of the chapter to which the section belongs, followed by a sequential number for
each section.
Body
The information needed to understand the workings of the machine and how to perform
adjustments is explained using text and illustrations.
Chapter number and title
Manual name
Manual reference number
FK-9F98-XX
Edition number
Edition 5.0
Page number
1-1
XP141 – Chapter 1 Initial Adjustment
Fuji Machine Mfg. Co., Ltd. Okazaki
SMT Quality Assurance Dept
CS Section
Manual created by
XP Series Training
Text for Service Engineers
Section number
Body
1.1 Leveling
FK-9F98-29 XP Series Training Text for Service Engineers
Edition 5.0 About this Manual
Fuji Machine Mfg. Co., Ltd. Okazaki
SMT Equipment Quality Assurance Dept.
CS Section
iii
Page number
A two digit hyphenated number appears in the footer on each page. The first digit of each page
number indicates the chapter number and the second digit is the sequential page number within that
chapter. Page 1-2, for example, indicates that this is the second page in the first chapter.
Manual name
The name of the manual that appears on the cover is also shown in the header on each page.
Edition number: The edition number is updated each time the manual is revised, with the number
reflecting the scale of changes that were made.
Minor revision: Minor changes are reflected in the part of the edition number after the decimal point,
for example, a change from edition 1.0 to 1.1. This change is made on the revised
pages only, and these pages can be downloaded as required from the Okazaki web
site.
Major revision: If major changes are made, the edition number is increased by one, for example, a
change from edition 1.0 to 2.0. This change is made on all pages, including the cover.
Purpose of this Training
• To provide knowledge and practical training in the areas of calibration and adjustment for the XP
Series machine.
• Carry out practical training for calibrating the various subsystems contained within the machine.
• Give practical exercises on how to adjust, calibrate and maintain the subsystems to enhance the
overall efficiency of the machine.
Persons Qualified for This Training
Any agent level service engineers with experience in machine operation, maintenance will benefit from
the information contained in this manual.
This manual was primarily made for “Agent” level service engineers.
Every effort has been made to make the contents of this manual as accurate as possible. If an error is
found, please let us know the page, section number, plus a brief description of the error. Thank you in
advance for your cooperation and assistance. Comments and opinions regarding this manual can be
sent to: trgall@okazaki.fuji.co.jp
FK-9F98-29 XP Series Training Text for Service Engineers
Edition 5.0 About this Manual
Fuji Machine Mfg. Co., Ltd. Okazaki
SMT Equipment Quality Assurance Dept.
CS Section
iv
Notes: