xp141-241-341-5.0E - 第98页

FK-9F98- 29 XP Series Training Text for Service Engineers Edition 5.0 XP241 – Chapter 1 Initial Adjustment Page 7 of 8 Fuji Machine Mfg. Co., Ltd. Okazaki. SMT Equipment Quality Assurance Dept . 1 – 7 CS Section 6. Press…

100%1 / 234
FK-9F98-29 XP Series Training Text for Service Engineers
Edition 5.0 XP241 – Chapter 1 Initial Adjustment Page 6 of 8
Fuji Machine Mfg. Co., Ltd. Okazaki.
SMT Equipment Quality Assurance Dept.
1 – 6 CS Section
1.6 Error handling
1. In the event of an error occurring due to software or servo problems, please save the
trace data to a floppy disc, and contact FUJI with detailed information regarding the
condition of the machine at the time the error occurred.
2. When the machine is not able to shutdown using the onscreen shutdown command, shut
down the machine using one of the following procedures:
Condition Procedure
Green LED (Run) in the CPU
flashing.
Hold down the [Ready On] and [Cycle Stop]
keys simultaneously until the buzzer comes ON
Green LED (Run) in the CPU
not flashing.
Turn OFF the breaker.
1.7 Checking the amplifier for the power remover (Keyence AP-80A)
1. Turn the M/C power and breaker OFF.
2. Remove the front cover of the amplifier and set the jumper switches as follows:
3. Power ON.
4. Press once and the following should display:
5. Use the up and down arrow keys to set the value to –5, so the display is like this:
1 – H
“…”
1 – H
-5
ON
DPS-10-B
KEYENCE AP-80A
A
HOLD
FK-9F98-29 XP Series Training Text for Service Engineers
Edition 5.0 XP241 – Chapter 1 Initial Adjustment Page 7 of 8
Fuji Machine Mfg. Co., Ltd. Okazaki.
SMT Equipment Quality Assurance Dept.
1 – 7 CS Section
6. Press once and the following should display:
7. Press twice and the setting is finished.
1.8 CPU Board Dip Switch Setting
1. When using software T1.21g and later versions confirm that the CPU board dip switches
are set as follows:
As shown the number 2, 4 and 8 dip switches should be set to ON. The remaining dip
switches should be set to OFF.
1 – h
0
1 2 3 4 5 6 7 8
ON
OFF
FK-9F98-29 XP Series Training Text for Service Engineers
Edition 5.0 XP241 – Chapter 1 Initial Adjustment Page 8 of 8
Fuji Machine Mfg. Co., Ltd. Okazaki.
SMT Equipment Quality Assurance Dept.
1 – 8 CS Section
NOTES: