ts9800-user-guide-7511-0360_A - 第3页
3 9.4 Symbol Definitions …………………………………………… 9.5 Operation 9.5.1 Login …………………………………………… 9.5.2 Disable password protection. ………………… .. 9.5.3 Enable password protection …………………… 9.5.4 Resetting master password …………………………… .…
2
CONTENTS
Pages
1. SAFETY ………………………………………………………....…….
2. UNPACKING AND INSPECTION ….…………………….……….….
3. TS9800 SYSTEM DESCRIPTION.…………………………………………...
4. SETUP INSTRUCTIONS
4.1 Mounting & Connection ………………………………………
4.2 Setup …………………………………………………………..
4.3 Nozzle Calibration …………………………………………….
5. OPERATION
5.1 Start Dispensing ………………………………………………..
5.2 Parameter Settings …………………………………………….
6. HEATING
6.1 Introduction ……………………………………………………
6.2 Safety Instructions ………………………………………………
6.3 Function ………………………………………………………..
6.4 Mounting & Connection ……………………………………….
6.5 Setup ……………………………………………………………
7. VALVE SETUP AND CLEANING
7.1 Valve Removal…………………………………………………
7.2 Installation of new nozzle insert …....…………………………. 2
7.3 Cleaning ……………………………………..………………...
8. TS9800 JET VALVE
8.1 Valve Modules …………………………………………………
8.2 Technical Specifications ………………………………………
8.3 Special Features ………………………………………………..
8.4 Materials Applied ………………………………………………
9. TS980 JET VALVE CONTROLLER
9.1 Description …………………………………………………….
9.2 Technical Specifications ……………………………………….
9.3 Features ………………………………………………………..
4-5
6
7
8-9
9-12
12-15
16
16-17
18
18
18
19
20-21
22
22
23-28
29-30
30
30-31
31
32
32
33
3
9.4 Symbol Definitions ……………………………………………
9.5 Operation
9.5.1 Login ……………………………………………
9.5.2 Disable password protection.…………………..
9.5.3 Enable password protection ……………………
9.5.4 Resetting master password …………………………….
9.5.5 Setup dispensing parameters ……………………………
9.5.6 Calling up dispense parameters……………………….
9.5.7 Reset cycle counter ……………………………
9.5.8 To run Dot or Line mode ……………….…………..…
9.5.9 Service Mode ………………………………..…
9.5.10 Wi-Fi (Not available) ………………..……..…
9.5.11 IOT (Remote Communication) ………………..……..…
9.5.12 Software Update ……………………………….
10. SPARE PARTS AND SCHEMATICS
10.1 Tappets & Nozzle Inserts ……………………………………..
10.2 Tools …………………………………………….……………
10.3 Jet Valve’s parts list …………………………….…………….
10.3 DB-15 Connector …….……………………………………….
10.3 DB-9 Connector……………………………………………….
11. TROUBLE SHOOTING
11.1 General problems…………..………………………………………….
11.2 General functions…………….….……………………………
11.3 General parameters ……………………………………………..
12. WARRANTY AND RETURN
12.1 Warranty……………………………………………………….
12.2 Return…………………………………………………….…….
34
35
35-36
36
36-37
37-39
39
39-40
40
41
41
41-43
43
44
44
45
46
46
46
47
46
47
48
49
50
51
4
1. SAFETY
1.1 Intended Use
OK International cannot be responsible for injuries or damages resulting
from unintended applications of its equipment. Unintended uses may result
from taking the following actions:
• Making changes to equipment that has not been recommended in the
User Guide
• Using incompatible or damaged replacement parts
• Using unapproved accessories or auxiliary equipment
1.2 Safety Precautions
• Do not operate this unit in excess of maximum ratings/settings
• Always wear appropriate personal protective clothing or apparel
• This equipment is for indoor use only
1.3 Specified Normal Operation
• The TS9800 System can be used for dispensing fluids with a wide range
of fluid viscosity.
• Additional heating may only be carried out with a heating system from
Techcon Systems
• The usage of the TS9800 System can be carried out under laboratorial or
production environment.
• Provided the highest frequencies (up to 1500 Hz; average frequency
should not exceed 800 Hz) and parameter settings must be followed.
• The usage of media which affects the functioning of the TS9800 System
must be avoided.
1.4 Technical Details
• The usage of the TS9800 System is only allowed inside and up to 2000
meters above sea level.
• Relative humidity: maximum 80% at 31 °C, decreasing linear until 50%
at 50 °C.
• Fluctuation of the line voltage is not allowed over ± 10% of the nominal
voltage.
• Transient over voltage according to IEC 60364-4-443 will be tolerated:
degree of pollution 2 is allowed.
• The employed power cords must be accompanied by an earthing
equipment conductor. The used power sockets must be within safety
regulations. When using cable, which are not supplied by OK
International, the warranty of the TS9800 System will only range till the
operator interface.
• During installation and operation please pay attention to supply enough
air circulation: minimum distance above and below the system (valve
and control unit) are 1.5 cm. OK International advises a separate housing
which is in alignment of fire prevention covering EN 61010-1.