00197902-03_UM_X-Serie-S_EN - 第16页
Contents User manual SIPLACE X-Series From software version 710.0 Edition 12/2016 16
User manual SIPLACE X-Series Contents
From software version 710.0 Edition 12/2016
15
7 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 395
7.1 Basic machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .395
7.1.1 Maintenance intervals for minor maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 395
7.1.2 Maintenance intervals for major maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 396
7.2 Heads and nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .398
7.2.1 Maintenance tasks for Multistar CPP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
7.2.2 Maintenance tasks for Speedstar C&P20 and C&P20 P . . . . . . . . . . . . . . . . . . . 399
7.2.3 Maintenance tasks for TwinStar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
7.2.4 Maintenance tasks for nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
Contents User manual SIPLACE X-Series
From software version 710.0 Edition 12/2016
16
User manual SIPLACE X-Series 1 Introduction
From software version 710.0 Edition 12/2016
17
1 Introduction
This user manual is a guide or reference work for operating and setting up the SIPLACE
®
X-Se-
ries S placement machines.
The X-Series S placement machines are available in six different variants.
– SIPLACE X4i S
–SIPLACE X4 S
– SIPLACE X4i S micron
– SIPLACE X4 S micron
–SIPLACE X3 S
–SIPLACE X2 S
The numbers in the type name indicate the number of gantries used. Each gantry has one place-
ment head.
This document is the original user manual.
1
1
The header of each chapter contains the release and software version, to which this manual ap-
plies.
PLEASE NOTE
The SIPLACE X-Series S placement machines have a largely identical design; any dif-
ferences will be explicitly indicated.
To view the available configurations and options, refer to the specifications for the
relevant SIPLACE X-Series S machines and the specifications for the SIPLACE X4
S micron / X4i S micron machines.
The diagrams in this user manual generally show the SIPLACE X4 S or X4i S machine.
These diagrams also apply to the SIPLACE X2 S / X3 S, SIPLACE X4 S micron or SI-
PLACE X4i S micron machines. In the event of deviations, a corresponding diagram will
be shown.