00197902-03_UM_X-Serie-S_EN - 第31页
User manual SIPLACE X-Series 1 Introduction From software version 710.0 Edition 12/2016 1.2 Machine description 31 1.2.2 Machine serial number The serial number of the machine ca n be found on the inside of the machine f…
1 Introduction User manual SIPLACE X-Series
1.2 Machine description From software version 710.0 Edition 12/2016
30
1.2 Machine description
1.2.1 The SIPLACE principle
The placement heads pick up the components from the fixed feeder modules on the component
trolley and then place the waiting boards.
The principle of "stationary component supply" and "stationary PCB", which have proven them-
selves in the other SIPLACE machines, offer a range of decisive benefits:
– Refilling components and splicing on tapes does not cause downtime.
– The vibration-free component feeder means that even the smallest components (e.g. 03015)
are picked up reliably.
– The PCB, which does not move during the placement process, prevents the components slip-
ping.
– The combination of placement heads with nozzle changers always guarantees an optimum
nozzle configuration for every placement process, thus minimizing traversing paths and opti-
mizing the placement sequence.
High flexibility, efficiency and reliable setups are the guarantee for top productivity in the SIPLACE
machines.
Minimum down times increase utilization and thus help to increase productivity.
User manual SIPLACE X-Series 1 Introduction
From software version 710.0 Edition 12/2016 1.2 Machine description
31
1.2.2 Machine serial number
The serial number of the machine can be found on the inside of the machine frame at location 1.
1
Fig. 1.2 - 1 Position of typeplate with serial number (example of SIPLACE X2 S / X3 S / X4 S machine shown)
(T) Direction of travel
(1) Typeplate
(1)
1 Introduction User manual SIPLACE X-Series
1.2 Machine description From software version 710.0 Edition 12/2016
32
1.2.3 EC Declaration of conformity
The product described below:
1
1
Manufactured by
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich 1
conforms to the regulations and standards listed in the EC Declaration of
Conformity provided.
1.2.4 Use as prescribed
The product may only be used for the areas of application specified in the catalogues and techni-
cal descriptions i.e. for the placement of SMD components and may only be used together with
the third party devices and components recommended or approved by ASM Assembly Systems
GmbH & Co. KG. Use for a different or extended purpose is not prescribed.
In the case of incorrect usage, ASM Assembly Systems GmbH & Co. KG will not assume liability
for any damage which occurs and will not guarantee the correct and proper function of machine
components.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
Product
Placement machine
Type SIPLACE X4i S SIPLACE X4 S SIPLACE X3 S SIPLACE X2 S
Item no.: 520440 520480 520310 520210
Product
Placement machine
Type SIPLACE X4i S
micron
SIPLACE
X4 S micron
Item no.: 520410 520420