00197902-03_UM_X-Serie-S_EN - 第314页
6 Station extensions User manual SIPLACE X-Series 6.1 Nozzle changer From software version 710.0 Edition 12/2016 314 6.1.2 Nozzle changer for SIPL ACE SpeedSt ar C&P20/C&P20 M This nozzle ch anger can ac commodat…
User manual SIPLACE X-Series 6 Station extensions
From software version 710.0 Edition 12/2016 6.1 Nozzle changer
313
6 Station extensions
For the relevant configurations and other options, refer to the individual specifications for the SI-
PLACE machines.
6.1 Nozzle changer
6.1.1 General
Nozzle changers can greatly increase the flexibility of the placement heads for processing differ-
ent types of component. If the placement program requires a nozzle change, then the placement
head automatically returns the old nozzle to the nozzle holder and picks up the new nozzle. Noz-
zles that were separated out during the vacuum check can also be quickly changed. It is signifi-
cantly more exact and faster to pick up nozzles from a nozzle changer than would be possible
manually. When placing small components, it is essential to minimize the radial eccentricity during
nozzle rotation.
6 Station extensions User manual SIPLACE X-Series
6.1 Nozzle changer From software version 710.0 Edition 12/2016
314
6.1.2 Nozzle changer for SIPLACE SpeedStar C&P20/C&P20 M
This nozzle changer can accommodate 6 or 4 magazines, each with 12 nozzle garages. The mag-
azines are seated on a common support. They are centered with two parallel pins and fixed in
place with 4 push buttons. The exact position is determined with two fiducials on each magazine.
The correct seat of the magazines on the basic nozzle changer body is monitored by micros-
witches, to prevent a collision of the placement head with any magazines projecting upwards. All
magazine locations must be filled since the safety circuit stops the machine in response to missing
magazines or magazines that are not seated correctly. At the installed nozzle station, components
can be blown off the nozzles of the SpeedStar and nozzles stripped off and rejected.
6
6.1.2.1 Nozzle changer for C&P20/C&P20 M with 6 magazines
Item no. 03070123-xx Nozzle changer basic assembly C&P20 - long
or 6
Item no. 03103514-xx Nozzle changer basic assembly CP/all - long
Item no. 00119715-xx Nozzle magazine C&P20 - long
6
Fig. 6.1 - 1 Nozzle changer for the SIPLACE SpeedStar C&P20 with nozzle magazine
CAUTION
Only use this nozzle changer together with the SpeedStar.
User manual SIPLACE X-Series 6 Station extensions
From software version 710.0 Edition 12/2016 6.1 Nozzle changer
315
6.1.2.2 Nozzle changer for C&P20/C&P20 M with 4 magazines
Item no. 03062463-xx Nozzle changer basic assembly C&P20 - short
or 6
Item no. 03103649-xx Nozzle changer basic assembly CP/all - short
Item no. 00119716-xx Nozzle changer for C&P20 - short
6
Fig. 6.1 - 2 Nozzle magazine, short, for the SIPLACE SpeedStar C&P20