00197902-03_UM_X-Serie-S_EN - 第37页
User manual SIPLACE X-Series 1 Introduction From software version 710.0 Edition 12/2016 1 .4 Qualification and training of personnel 37 1.4 Qualification and training of personnel Personnel used for opera tion, preventiv…
1 Introduction User manual SIPLACE X-Series
1.3 Line concept From software version 710.0 Edition 12/2016
36
1.3.2 SIPLACE line and software solutions
SIPLACE provides comprehensive solutions based on modular software tools for SMT machines,
lines and production management: the SIPLACE software suite.
1.3.2.1 Product definition, optimization and line control
Fast, fault-free introduction of products and optimum utilization of production lines are essential to
maximize production output. The programs from the SIPLACE software suite allow you to easily
program products, fine-tune the programs you have created and then find the balance for them
within your SMT production lines.
1.3.2.2 Production monitoring & process control
To achieve the production targets that are set, it is important to constantly monitor and check the
production facilities. The SIPLACE software suite contains monitoring products tailored to suit the
user group. These signal immediately if limits are exceeded on the machine or the production line.
1.3.2.3 Setup verification & traceability
Setup errors lead to series errors. The user-friendly SIPLACE software programs help you to
avoid such errors, and thus ensure high quality in your electronics production.
1.3.2.4 The benefits of the SIPLACE software suite at a glance:
– Fast programming and error detection
– Reduces changeover times and stoppages
– Ensures optimum utilization of your production line's productivity
– Real-time information from the production area
– Incredibly fast distribution of information
– Optimum use of resources
– Timely notification when production materials need to be re-ordered
– Coordination of maintenance measures
User manual SIPLACE X-Series 1 Introduction
From software version 710.0 Edition 12/2016 1.4 Qualification and training of personnel
37
1.4 Qualification and training of personnel
Personnel used for operation, preventive maintenance, inspection and installation must hold the
relevant qualifications for the job. The user must keep tight control over their responsibilities, as-
signment and supervision. Any employee who does not have the relevant training must be trained
and given appropriate instruction. The instruction is to be given by trained and authorized person-
nel.
SMT Academy
The SMT Academy provides technical training courses for your team, covering everything from
basic SIPLACE operator training to advanced follow-up training for your experts. Our courses can
either be held at your company or at one of our SIPLACE training centers worldwide. In addition
to our range of standard training programs, we can also offer customized courses to meet your
individual requirements.
SIPLACE training courses are always on a modular basis. This means that you can either book a
standard course or compile your own training program with the individual topics required for your
production environment.
1
1
Training courses for SIPLACE X-Series
Special operator, maintenance and technical (system configuration and repairs) training courses
are available for the SIPLACE X-Series.
Standard courses
– SIPLACE operator training
– SIPLACE technical training for X-Series
Follow-up courses and customized
courses
– SIPLACE X-Series upgrade training modules
– Customized training available on request
Other training courses
– SIPLACE programmer training for SIPLACE Pro
– SIPLACE Vision Training
– SIPLACE feeder care training
– SIPLACE placement heads - modular training
units
PLEASE NOTE
Operation of system only by qualified personnel
Only staff with the relevant qualifications may start up, operate or otherwise work on
the machine.
The qualification must be proven by means of training courses or instruction for the per-
sonnel.
1 Introduction User manual SIPLACE X-Series
1.5 Operator levels From software version 710.0 Edition 12/2016
38
1.5 Operator levels
Certain functions or menus may only be executed or accessed by specially trained personnel. A
differentiation is made between the following operator levels:
– Production
– Advanced production
– Service (customer)
– Service (SIPLACE)
The operator levels "Advanced production" and "Service (customer)" can be password protected.
The operator level "Service (SIPLACE)" is already password protected.
Production 1
This operator level includes those people who have been trained to operate the machine. These
people are authorized to use any functions associated with operating the machine and may call
up any menus needed to use the machine.
Advanced production 1
People with this operator level have completed special training and are authorized to perform
setup tasks e.g. creating setup configurations or determining Vision parameters etc.
Service (customer) 1
People with this operator level are specially trained technicians at the customer end, who can, for
example, define machine option settings.
Service (SIPLACE) 1
People with this operator level are trained to perform service work, such as the conversion and
retrofitting of machines.