00197902-03_UM_X-Serie-S_EN - 第399页
User manual SIPLACE X-Series 7 Maintenance From software version 710.0 Ed ition 12/2016 7.2 Heads and nozzles 399 7.2.2 Maintenance tasks for S peedstar C&P20 and C&P20 P 7 * See also maintenance display 7.2.3 Ma…
7 Maintenance User manual SIPLACE X-Series
7.2 Heads and nozzles From software version 710.0 Edition 12/2016
398
7.2 Heads and nozzles
7.2.1 Maintenance tasks for Multistar CPP
7
* See also maintenance display
Maintenance tasks for
Multistar CPP
(6 monthly or at 40 mill. components)
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Prepare the placement head 2 X*
Replace the pressure control valve 3 X*
Maintenance tasks on vacuum-conducting parts
▪ Dismantle the screwed joint and the silencer
▪ Check/replace the silencer
▪ Dismantle the holding circuit
▪ Clean the holding circuit housing
▪ Replace the O-rings on the holding circuit housing
▪ Clean the screwed joint
▪ Fit the holding circuit, the silencer and the screwed
joint
8X*
Oil the Z-axis support roller 2 X*
Oil the Z axis linear guide 1 X*
Check/replace the DP vacuum hoses 1.5/hour X*
Clean the light barrier on the DP drive 15 X*
Oil the DP segment guide 4 X*
Oil the DP driver bearing 6 X*
Replace the filter disks 3 X*
Oil the star bearing 3 X*
Clean the component sensor 1 X*
User manual SIPLACE X-Series 7 Maintenance
From software version 710.0 Edition 12/2016 7.2 Heads and nozzles
399
7.2.2 Maintenance tasks for Speedstar C&P20 and C&P20 P
7
* See also maintenance display
7.2.3 Maintenance tasks for TwinStar
7
7.2.4 Maintenance tasks for nozzles
7
Maintenance tasks for
Speedstar C&P20/A/M/P
Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Prepare the placement head 5 X*
Replace the pressure control valve 3 X*
Clean the Z axis 6 X*
Oil the DP segment guide 15 X*
Oil the Z axis linear guide 3 X*
Oil the DP driver bearing 4 X*
Check/replace the vacuum-conducting parts
▪ Aperture ring and cover
or
▪ Holding circuit and silencer
5X*
Clean the raceway and the jaws 2 X*
Replace the filter disks 15 X*
Check/clean/replace the switching disks 1/hour X*
Clean the component sensor 1 X*
Maintenance tasks for Twin Duration
[min]
Each
week
Every 3
months
Every 6
months
Every
12
months
Prepare the placement head 5 X
Replace the pressure control valve 3 X
Clean the sleeve and nozzle seat 2 X
Clean/replace the additional volume filters 2 X
Maintenance tasks for nozzles Duration
[min]
Each
week
Every 3
months
Every 6
months
Every 12
months
Clean/replace the ceramic nozzles 2 X
Replace the plastic nozzles 2 X
7 Maintenance User manual SIPLACE X-Series
7.2 Heads and nozzles From software version 710.0 Edition 12/2016
400