00197902-03_UM_X-Serie-S_EN - 第54页

2 Operational safety User manual SIPLACE X-Series 2.2 Warning labels From software version 710.0 Edition 12/2016 54 Fig. 2.2 - 2 Warning labels on the machine - part 2 (example of SIPLACE X2 S / X3 S / X4 S shown) W203, …

100%1 / 416
User manual SIPLACE X-Series 2 Operational safety
From software version 710.0 Edition 12/2016 2.2 Warning labels
53
2.2.1 Warning labels on the machine
Fig. 2.2 - 1 Warning labels on the machine - part 1 (example of SIPLACE X2 S / X3 S / X4 S shown)
W201, item no. 03009338-01
W203, item no. 03009342-01
W204, item no. 03009343-01
W210, item no. 03009350-01
W206, item no. 03009345-01
Item W laser class 2, item no. 03134118-01
(T) Direction of PCB transport
W 203
W 210
W 204
W 201
W 204
W 206
W Laser class 2
2 Operational safety User manual SIPLACE X-Series
2.2 Warning labels From software version 710.0 Edition 12/2016
54
Fig. 2.2 - 2 Warning labels on the machine - part 2 (example of SIPLACE X2 S / X3 S / X4 S shown)
W203, item no. 03009342-01
W204, item no. 03009343-01
W210, item no. 03009350-01
(1) Warning strips, down on the four protective hoods
(T) Direction of PCB transport
W 210
W 204
W 203
W 204
1
1
User manual SIPLACE X-Series 2 Operational safety
From software version 710.0 Edition 12/2016 2.2 Warning labels
55
2
2.2.1.1 Warning label W201
2
W201 in fig. 2.2 - 1, page 53, item no. 03009338-01 (quantity per machine: 1)
2.2.1.2 Warning label laser class 2
2
W Laser class 2 in fig. 2.2 - 1, page 53, item no. 03134118-01 (quantity per machine: 1)
WARNING
Damage to warning labels!
The warning labels can be damaged or destroyed by abrasive cleaning agents or sol-
vents.
Do not use abrasive cleaners or solvents for cleaning warning labels.
Replace any damaged or illegible warning labels.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
SAFE OPERATION OF THE MACHINE
Safe operation of the machine depends absolutely on the opera-
tor being familiar with the user manual and safety instructions
and putting them into effect.
2
2
2
LASER RADIATION
Laser class 2
Acc. to IEC 60825-1:2014
Do not look into beam!