00194422-09_MM_X-Series_en - 第57页
Major Maintenance 5.6.4 Final Work Maintenance Tasks for the Conveyor Maintenance Manual SIPLACE X Series 57 Cleaning and Preserving the Guide Shafts of the Width Adjustmen t Cleaning and Preserving the Guide Shafts of t…
Major Maintenance
Maintenance Tasks for the Conveyor 5.6.3 Performing Maintenance Tasks
56 Maintenance Manual SIPLACE X Series
Cleaning and Preserving the Hexagonal Shafts
Cleaning the Fixture Tape
Cleaning and Preserving the Recirculating Ball Screws
► Apply Teflon oil to a lint-free cloth and clean the hex
-
agonal shafts (1) in the conveyor.
Alternatively you can also use a SIPLACE cleaning
cloth.
CAUTION!
Never apply the Teflon oil to the cloth inside the machine.
Where possible, go away from the machine.
► Repeat the procedure for all hexagonal shafts in the
conveyor.
CAUTION!
Risk of cutting!
The fixing strip has a sharp edge.
► Clean the fixing strip of the width adjustment clamp
-
ing unit using a lint-free cloth moistened with ethanol.
► Clean and preserve the recirculating ball screw (1) by
running a SIPLACE cleaning cloth along the thread of
the screw.
► Repeat this procedure for all ball screws in the con
-
veyor.
Major Maintenance
5.6.4 Final Work Maintenance Tasks for the Conveyor
Maintenance Manual SIPLACE X Series 57
Cleaning and Preserving the Guide Shafts of the Width Adjustment
Cleaning and Preserving the Guide Shafts of the Conveyor Sides
Preserving the Conveyor - Moving the Sides and Repeating Steps
Moving the Sides and Repeating Steps
► Now move all conveyor sides to the other side of the conveyor. Use the station software to set the
dual conveyor to single conveyor mode (left).
► Now perform the above mentioned cleaning and preserving steps to the other side of the conveyor.
5.6.4
5.6.4 Final Work
Final Work
► Restore the original conveyor configuration.
► Clean and preserve the lower (1) and the upper (2)
guide rail of the width adjustment with a SIPLACE
cleaning cloth.
► Repeat the procedure for all width adjustment guide
shafts on the conveyor.
► Clean and preserve the guide shaft (1) for the con
-
veyor sides with a SIPLACE cleansing tissue.
► Repeat the procedure for all guide shafts on the con
-
veyor sides.
Major Maintenance
Maintenance Tasks for the Conveyor 5.6.4 Final Work
58 Maintenance Manual SIPLACE X Series