00194422-09_MM_X-Series_en - 第58页
Major Maintenance Maintenance Tasks for the Conveyor 5.6.4 Final Work 58 Maintenance Manual SIPLACE X Series
Major Maintenance
5.6.4 Final Work Maintenance Tasks for the Conveyor
Maintenance Manual SIPLACE X Series 57
Cleaning and Preserving the Guide Shafts of the Width Adjustment
Cleaning and Preserving the Guide Shafts of the Conveyor Sides
Preserving the Conveyor - Moving the Sides and Repeating Steps
Moving the Sides and Repeating Steps
► Now move all conveyor sides to the other side of the conveyor. Use the station software to set the
dual conveyor to single conveyor mode (left).
► Now perform the above mentioned cleaning and preserving steps to the other side of the conveyor.
5.6.4
5.6.4 Final Work
Final Work
► Restore the original conveyor configuration.
► Clean and preserve the lower (1) and the upper (2)
guide rail of the width adjustment with a SIPLACE
cleaning cloth.
► Repeat the procedure for all width adjustment guide
shafts on the conveyor.
► Clean and preserve the guide shaft (1) for the con
-
veyor sides with a SIPLACE cleansing tissue.
► Repeat the procedure for all guide shafts on the con
-
veyor sides.
Major Maintenance
Maintenance Tasks for the Conveyor 5.6.4 Final Work
58 Maintenance Manual SIPLACE X Series
General Tasks
Filling the Grease Gun
Maintenance Manual SIPLACE X Series 59
6
6 General Tasks
General Tasks
6.1
6.1 Filling the Grease Gun
Filling the Grease Gun
► Pull back the grease gun plunger. It must lock into
place.
► Open the grease gun by unscrewing the top section.
► Fill the grease gun with suitable grease. Use a clean
spatula.
Try to fill the gun with grease without trapping in any
air pockets.
► Close the grease gun by screwing the top section
back on.
► Loosen the lock on the back of the grease gun. The
spring force moves the plunger forward.
► Push back the ball on the vent screw to vent the
grease gun. Use a screwdriver or similar tool to help
you.
CAUTION!
Always vent the grease gun once you have finished
greasing the machine!
► Press the trigger until the grease emerges from the
front of the gun.
► Remove excess grease with a lint-free cloth.
The grease gun is now ready for use.