NPM Calibration Manual-En - 第79页

NPM Maint en anc e E di ti on 9.11 Hei ght Off set Page 9-78 EJM9BE-M B-09M-21 20 Remove the p i ckup-pos ition-he i ght teaching j ig. 21 Press + [OK]. • T he head mov es to the worki ng posi tion. 22 Turn OFF the se rv…

100%1 / 99
NPM
Maintenance Edition
9.11 Height Offset
EJM9BE-MB-09M-21 Page 9-77
17
Press + [OK].
•
The calibration is carried out.
18
Check that it is successfully complete.
∗
Perform steps 3–18 for also the other table.
19
Press .
•
When exiting this screen to the other one, you
are always prompted to save the data.
∗
To save the data obtained by the calibration,
press [Yes].
•
If you press [No], the return-to-origin process
is carried out and the data obtained by the
calibration are lost.
•
After the above operation, the next screen is
displayed.
UnitCalibHeadHightMeasure-07E00
19
UnitCalibHeadHightMeasure-05E00
17
UnitCalibHeadHightMeasure-06E00
18
NPM
Maintenance Edition
9.11 Height Offset
Page 9-78 EJM9BE-MB-09M-21
20
Remove the pickup-position-height
teaching jig.
21
Press + [OK].
•
The head moves to the working position.
22
Turn OFF the servo switch.
23
Open the safety cover.
24
Detach the nozzles.
25
Close the safety cover.
26
Turn ON the servo switch.
27
Press + [OK].
•
After the head moves to the origin position,
the screen selected in step 19 is displayed.
UnitCalibHeadHightMeasure-08E00
21
UnitCalibHeadHightMeasure-09E00
27
NPM
Maintenance Edition
9.12 Vertical Line Camera
EJM9BE-MB-09M-21 Page 9-79
9.12 Vertical Line Camera
1
Press .
2
Press [VerticalCamera].
3
Select a table.
∗
Select the target table for calibration.
4
Press + [Nozzle install].
•
The head moves to the working position.
5
Turn OFF the servo switch.
6
Open the safety cover.
7
Attach the nozzle to the displayed
nozzle position.
12-nozzle head
∗
Attach the 230CS nozzle to the nozzle
position 4.
8-nozzle head
∗
Attach the 230C nozzle to the nozzle position
3.
2-nozzle head
∗
Attach the No.1003 nozzle to the nozzle
position 2.
8
Close the safety cover.
9
Turn ON the servo switch.
UnitCalibVerticalLineCamera-01E00
1
2
3
4