1OM-1505-004_w - 第10页
7 1OM-1505 Installation/T ransfer and After-Sale Service (1) Installation/T ransfer (a) Do not install or transfer the machine on the customer side after shipment. T o ensure perfect operation of the machine, including s…
6
1OM-1505
(l) The system is broken down due to the use of parts purchased through a sales
route other than the ones authorized by our company (The maintenance parts
dealing companies are specified by our company).
In no event shall Hitachi be liable for any warranty other than the express one here
and any implied warranties of merchantability or fitness for any particular purpose.
In addition, Hitachi is not liable for any direct or indirect loss or damages
whatsoever, whether based upon express or implied warranty.
No oral or written information, or advice/suggestion given by Hitachi (its executives,
employees, agencies and all concerned) to the original purchaser or a third party
shall create a warranty or obligation to Hitachi, regarding the conformity with the
performance of the machine. Formally approved information or advice/suggestion
are excluded.
Hitachi is not responsible for any damage to the provided application software or
loss of data, arising from any damage to this machine.
(4)
WarrantyCerticate
This certi
ficate cannot be reissued. Please keep this in a safe place.
1103-002
7
1OM-1505
Installation/Transfer and After-Sale Service
(1) Installation/Transfer
(a) Do not install or transfer the machine on the customer side after shipment.
To ensure perfect operation of the machine, including safety and accuracy, only
our installation service department or well-trained personnel (authorized by us)
will install the machine or transfer it to another place.
(b) Before the machine is installed, the installation site must be properly prepared
on the customer side to ensure the installation requirements described in the
instruction manual.
(c) When the machine should be transferred to another place, please contact the
marketing department or sales agency of Hitachi High-T
echnologies beforehand
to avoid any trouble related to the transfer.
When the machine is transferred to another place without prior notice to us, it
may break down or malfunction.
In that case, we will in no way be liable for any damage to the machine
regardless of the possibility of any or such damages arising from the
displacement.
Example of Failure and Malfunctions after Machine Transfer:
Frequency and voltage dif
ference in local site may cause a machine
malfunction.
The surrounding circumstances (electromagnetic radiation obstruction or
noises) may cause a machine malfunction.
(2) After-Sale Service
(a)
Contact the marketing department or sales agency of Hitachi High-T
echnologies
for after-sale servicing.
(b)
Consult us for maintenance contracts, inspections and servicing contracts, etc.,
after expiration of the warranty.
Requirements, Orientation, and Training for Operators
Only well-trained personnel should operate the machine.
Mishandling of the machine will cause a major accident.
We offer orientation and training sessions, using our facilities or local ones to ensure
perfect operation of the machine, including safety and accuracy.
Consult the marketing department or sales agency of Hitachi High-Technologies for the
training application. (Training Fee Charged)
0906-001
8
1OM-1505
AboutSpecicationChange
Consult the marketing department or sales agency of Hitachi High-Technologies for
desired changes of the machine specifications.
In no event will we be liable for any direct, indirect, special, incidental, or consequential
damages resulting from any modification made without any prior notice in a written form.
About Disposal of Machine
This machine uses solder paste and industrial alcohol.
Be sure to wear protective equipment (gloves, apron, and mask, etc.) during the disposal
work.
Before disposing of the machine, obtain the material safety data sheet (MSDS) from each
product maker and check them carefully. Each material should be disposed of according
to the described disposal method.
The machine must be handled differently than ordinary trash.
(1) About Disposal of Solder Paste
Solder paste should be entrusted to an authorized industrial waste disposal firm and
disposed of in accordance with "Ordinance on Prevention of Lead Poisoning and
Provisions related to Waste Disposal and Cleaning".
Rags, cleaning paper, etc., used for wiping shall also be disposed of in the same way.
Obtain the material safety data sheet (MSDS) from the maker and check the contents
described in detail.
(2) About Disposal of Industrial Alcohol
Industrial alcohol should be entrusted to an authorized industrial waste disposal
firm and disposed of in accordance with "Provisions related to Waste Disposal and
Cleaning".
Rags, etc., must be damped with industrial alcohol and incinerated in an open
incinerator
.
As for disposal of the container, be sure to remove alcohol completely from the
container before the disposal.
Obtain the material safety data sheet (MSDS) from the maker and check the contents
described in detail.
0906-001