1OM-1505-004_w - 第109页
1OM-1505 3-4 1. Automatic Operation : Chap.3 1.1.4 Safety Check for Surrounding Area of the Machine Before starting the operation, perform the safety check for the surrounding area of the machine. CAUTION Before starting…
1OM-1505
1. Automatic Operation : Chap.3
3-3
1.1.3 Cover Section Check
DANGER
There are strong motorized and high-voltage areas
inside the machine. Special caution should be
paid not to touch them. Doing otherwise will cause
personal injury (serious accident).
•
Only qualied maintenance personnel should
detach the covers.
•
The machine should be operated with the covers
being attached.
•
If a cover is detached, be sure to reattach it.
•
Be sure to transparent covers before operating the
machine.
•
Do not disengage the interlock mechanism of the
transparent covers (door type).
Conrm that the transparent covers on the upper section of the machine and safety
doors around the base Maintenance Shutter have been closed.
Safety Cover
Maintenance
Shutter
Front Side of MachineRear Side of Machine
Transparent Cover
Cover Lock Switch
F1C3
1002-002
1OM-1505
3-4
1. Automatic Operation : Chap.3
1.1.4 Safety Check for Surrounding Area of the Machine
Before starting the operation, perform the safety check for the surrounding area of
the machine.
CAUTION
Before starting the automatic operation, check carefully
that there is no person around the machine (especially on
the other side of the machine operation). Make sure that
no objects (tools, parts, etc.) are left behind.
0906-001
1OM-1505
1. Automatic Operation : Chap.3
3-5
1.2 Preparation before Operation
1.2.1 Power Input
Procedure
(1) Remove the padlock from the lock lever of the power breaker.
Lock lever
Padlock
Power Breaker
F1C4
(2) Set the power breaker to "ON".
(Power is supplied to the machine.)
Power Input
F1C5
NOTICE
Before re-supplying power to the machine, shut
down the power breaker and wait for about 10
seconds. After that, turn on the power breaker again.
If the power breaker is turned on immediately after it was
shut down, the previous data (the data retained before the
current is intercepted) will not be reset, leading to a rare
malfunction in the breaker.
1002-002