1OM-1505-004_w - 第133页
1OM-1505 4-4 3. Program Change Operation: Chap.4 3.2 Selection of Production Model Setup the product model. Procedure (1) Display the "PRODUCT CHG." window , following the procedures on the developed graphics. …
1OM-1505
3. Program Change Operation: Chap.4
4-3
3. Program Change Operation
3.1 Selection of Run Mode
Set the "RUN MODE" on the "TEST Opn. Mode" tab shieet in the "Operation"
window.
Nomally, select "Print".
F1D1-1
1002-002
Graphic
Development
1OM-1505
4-4
3. Program Change Operation: Chap.4
3.2 Selection of Production Model
Setup the product model.
Procedure
(1) Display the "PRODUCT CHG." window, following the procedures on the
developed graphics.
"PRGM. CHG" Window F1D2
(2) Select the program name to be specied as a current one (production model).
(3) Press the [PRGM. CHG.] button.
"Warning" window will be displayed.
F1D3
(4) Press the [Yes] or [No] button.
When the [Yes] button is pressed, the product model is changed and the
"Productions Schedule Number of PCB" setup window.
When the [No] button is pressed, the product model is changed and appears
and the background color turns blue.
Note
If an error is found in the pattern program, the program change operation is not
executed.
In this case, correct the pattern program and perform the program change
operation again.
1002-002
Graphic
Development
1OM-1505
3. Program Change Operation: Chap.4
4-5
3.3 SET-UP
Perform various setup operations using the "Setup" window.
Reference
Refer to "Volume 2, Chapter 3 Product Change Menu" for the operation
procedure.
1002-002