1OM-1505-004_w - 第17页

 Data may become unavailable due to breakdown or mishandling of the machine. It is strongly recommended that the compact  ash (CF) memory data be periodically backed up with the network terminal (option). Strictly obse…

100%1 / 217
Before starting the machine and after a setup operation, be sure to check if
any industrial alcohol is leaking from a crack of the hose joint or the hose itself
running between the solvent tank and the cleaning nozzle.
Do not operate the machine while industrial alcohol is leaking. Otherwise, the
leakingalcoholmay
catchreeasily.
Refer to "2.1 Daily Maintenance" and "4.5 Checking of Industrial Alcohol Hose
and Joints" in "Chapter 1 (Vol. 4)" for the areas to be checked.
Whenever a leakage is found, contact our service person.
Be sure to wear suitable clothes for working so as to avoid any injuries.
Try to bundle your hair in ponytail or a braid. Otherwise, your hair might get
caught in the moving mechanisms of the machine.
Be sure to fasten the buttons on your clothes (especially sleeves) to avoid
getting caught in the moving mechanisms of the machine.
Even after the [EMERGENCY ST
OP] switch is pressed, note that electrical
power is supplied to the control device.
To shutdown the power to all loads, set the power breaker to "OFF".
When an "Emergency Switch Off" function is required, it must be prepared outside the
machine on the customer side.
Emer
gency Switch Stop
:
Emer
gency Interception of
Controlled Load Power
Sources
Emergency Switch Off : Emergency Interception of All Load Power Sources
In principle, the overall operation of the machine including the button
operations on the operation panel and the touch screen must be controlled by
only one person.
If there are more than one, ensure good communication by giving loud verbal
instructions.
Before starting the automatic operation, check carefully that there is no person around
the machine (especially on the other side of the machine operation). Make sure that no
objects (tools, parts, etc.) are left behind.
Safe-3
Safety Precautions
1OM-1505
2. Common Precautionary Items
1002-002
Data may become unavailable due to breakdown or mishandling of the machine.
It is strongly recommended that the compact
ash (CF) memory data be periodically
backed up with the network terminal (option).
Strictly observe the following instructions.
Be sure to strictly keep the above-mentioned instructions. Otherwise, not only wrong
operations of the machine but also personal injury will result.
Safe-4
Safety Precautions
1OM-1505
0906-001
2. Common Precautionary Items
Notes on Machine Operations
Please keep the instruction manual in a safe place within reach.
Follow the instructions in the instruction manual for correct handling of the machine.
Be sure to fully understand the contents of the safety instructions in the instruction
manual and follow the instructions.
Please pay special attention to the precautionary items lab
eled on the machine or
described in the instruction manual and be sure to keep them. When the precautionary
items are ignored, it will result in personal injury or property damage (damage to the
machine).
Be sure to follow the operational instructions described in
the instruction manual.
Do not modify the machine nor use any parts other than the specified ones for the
machine. Be sure not to use the machine with its safety devices detached. Doing
otherwise may cause personal injury.
Also, be sure not to change the setting of the operating system nor install any software
additionally.
Do not perform any operations other than those described
in the instruction manual.
Whenever a problem arises, regarding the machine operations, performance, etc.,
please contact the marketing department or sales agency of Hitachi High-Technologies
for the solution.
This machine uses energetic driving systems and high voltage.
This power and voltage is high enough to cause death or serious injury
.
To avoid this danger, respect the following guideline.
•
The machine must be used with the covers being attached.
•
Be sure to close the door before operating the machine.
•
Do not disengage the interlock mechanism of the door.
Whenever you feel danger or abnormality
, immediately press the
[EMERGENCY STOP] switch to stop the machine. If the machine is kept
running in abnormal condition, an accident or a breakdown will result.
When there is a problem with the machine, locate the cause and assess the
condition. Set the power breaker to "OFF".
After
theproblem
hasbeenrectiedcompletely,resetthemachinetoits
normal condition.
Safe-5
Safety Precautions
1OM-1505
2. Common Precautionary Items
0906-001