1OM-1505-004_w - 第171页

1OM-1505 3. Specifications of Printing Stencil Plate Making : Chap.5 5-20 (5) Stencil Frame Size: 650 × 750 mm (Extended Length) 1 4 5 0 5 7 325 ± 1 650 40 15 0 4 5 1 50 50 Stencil Plate Center Stencil Plate Rear Referenc…

100%1 / 217
1OM-1505
3. Specifications of Printing Stencil Plate Making : Chap.5
5-19
(4) Stencil Frame Size: 750 × 650 mm (Extended Width)
074
056
375 ± 1
750
40
15
04
51
50
50
Stencil Plate Center
Stencil Plate Rear Reference Point
Stencil Plate Front Reference Point
Mesh
Metal
Metal Size 600 or more
Metal Size 500 or more
570 or more
Stencil Side
Max. 350 (PCB Size)
150 ± 1
(Based on Frontr Reference Point)
Aluminum
Box Tubing
Max. 510 (PCB Size)
Margin for Paste
(Front Side of Machine)
325± 1 (Based on Center Reference Point)
500 ± 1 (Based on Rear Reference Point)
30 to 40
Unit: mm
F1E4
Note
(a) The two-dot chain line shows the external shape of the PCB.
(b) If combined with metal, the metal (600
×
500 mm)
should be located as
shown in F1E4
1103-003
1OM-1505
3. Specifications of Printing Stencil Plate Making : Chap.5
5-20
(5) Stencil Frame Size: 650 × 750 mm (Extended Length)
145
057
325 ± 1
650
40
15
04
51
50
50
Stencil Plate Center
Stencil Plate Rear Reference Point
Stencil Plate Front Reference Point
Mesh
Metal
Metal Size 430 or more
Metal Size 571 or more
430 or more
Stencil Side
Max. 381 (PCB Size)
184.5 ± 1
(Based on Frontr Reference Point)
Aluminum
Box Tubing
Max. 330 (PCB Size)
Margin for Paste
(Front Side of Machine)
375 ± 1 (Based on Center Reference Point)
565.5 ± 1 (Based on Rear Reference Point)
30 to 40
Unit: mm
F1E5
Note
(a) The two-dot chain line shows the external shape of the PCB.
(b) If combined with metal, the metal (460
×
571 mm)
should be located as
shown in F1E5
(c) The squeegee length of 350 mm or less should be used.
1103-003
1OM-1505
3. Specifications of Printing Stencil Plate Making : Chap.5
5-21
(6) Stencil Frame Size: 650 × 550 mm (Extended Width)
073
055
325 ± 1
650
40
15
04
51
50
50
Stencil Plate Center
Stencil Plate Rear Reference Point
Stencil Plate Front Reference Point
Mesh
Metal
Metal Size 460 or more
Metal Size 400 or more
430 or more
Stencil Side
Max. 250 (PCB Size)
150 ± 1
(Based on Frontr Reference Point)
Aluminum
Box Tubing
Max. 330 (PCB Size)
Margin for Paste
(Front Side of Machine)
275 ± 1 (Based on Center Reference Point)
400 ± 1 (Based on Rear Reference Point)
30 to 40
Unit: mm
F1E6
Note
(a) The two-dot chain line shows the external shape of the PCB.
(b) If combined with metal, the metal (460
×
400 mm)
should be located as
shown in F1E6
(c) The squeegee length of 350 mm or less should be used.
1103-003