1OM-1505-004_w - 第184页
1OM-1505 1. Specications of Backup Jig Making : Chap.6 6-1 1. Specications of Backup Jig Making It is required to make a PCB backup jig or a vacuum jig in accordance with the PCB width and the condition of the PCB when…
1OM-1505
0906-001 6-B
1OM-1505
1. Specications of Backup Jig Making : Chap.6
6-1
1. Specications of Backup Jig Making
It is required to make a PCB backup jig or a vacuum jig in accordance with the
PCB width and the condition of the PCB when printing is performed, using the
backup jig.
PCB Backup Jig
The whole area (back side) of the PCB must be supported by one block. When the
back of the PCB does not have any protuberance, this jig can be used effectively.
•
PCB Backup Jig (PCB Width W "250<=W<=460")
Reference
Refer to "3. PCB Backup jig (PCB Width W "250<=W<=460")" for details.
•
PCB Backup Jig (PCB Width W "65<=W<250")
Reference
Refer to "4. PCB Backup jig (PCB Width W "65<=W<250")" for details.
•
PCB Backup Jig (PCB Width W "50<=W<65")
Reference
Refer to "5. PCB Backup jig (PCB Width W "50<=W<65")" for details.
PCB Vacuum Jig
The PCB is absorbed and clamped. This is applicable for a thin or a warped PCB.
Note
When a PCB has many through holes, it may not be picked up. In this
case,consult the marketing department or sales agency of Hitachi High-
Technologies for details.
•
PCB Vacuum Jig (PCB Width W "250<=W<=460")
Reference
Refer to "6. PCB Vacuum Jig (PCB Width W "250<=W<=460")" for details.
•
PCB Vacuum Jig (PCB Width W "65<=W<250")
Reference
Refer to "7. PCB Vacuum Jig (PCB Width W "65<=W<250")" for details.
•
PCB Vacuum Jig (PCB Width W "50<=W<65")
Reference
Refer to "8. PCB Vacuum Jig (PCB Width W "50<=W<65")" for details.
1103-002
1OM-1505
6-2
2. Assembling Table : Chap.6
1103-002
2. Assembling Table
The backup jig consists of the following parts. When the jig is created, use the
Part Drawing referring to the assembling table.
PCB Backup Jig
PCB Backup Jig (PCB Width W "250<=W<=460")
-(M900-ZI-001)
-(M900-ZI-001PA)
PCB Backup Jig (PCB Width W "65<=W<250")
-(M900-ZI-003)
-(M900-ZI-003PA)
PCB Backup Jig (PCB Width W "50<=W<65")
-(M900-ZI-005)
-(M900-ZI-005PA)
PCB Vacuum Jig
PCB Vacuum Jig (PCB Width W "250<=W<=460")
-(M900-ZI-002)
-(M900-ZI-002PA)
PCB Vacuum Jig (PCB Width W "65<=W<250")
-(M900-ZI-004)
-(M900-ZI-004PA)
PCB Vacuum Jig (PCB Width W "50<=W<65")
-(M900-ZI-006)
-(M900-ZI-006PA)