1OM-1505-004_w - 第185页
1OM-1505 6-2 2. Assembling T able : Chap.6 1 103-002 2. Assembling T able The backup jig consists of the following parts. When the jig is created, use the Part Drawing referring to the assembling table. PCB Backup Jig PC…
1OM-1505
1. Specications of Backup Jig Making : Chap.6
6-1
1. Specications of Backup Jig Making
It is required to make a PCB backup jig or a vacuum jig in accordance with the
PCB width and the condition of the PCB when printing is performed, using the
backup jig.
PCB Backup Jig
The whole area (back side) of the PCB must be supported by one block. When the
back of the PCB does not have any protuberance, this jig can be used effectively.
•
PCB Backup Jig (PCB Width W "250<=W<=460")
Reference
Refer to "3. PCB Backup jig (PCB Width W "250<=W<=460")" for details.
•
PCB Backup Jig (PCB Width W "65<=W<250")
Reference
Refer to "4. PCB Backup jig (PCB Width W "65<=W<250")" for details.
•
PCB Backup Jig (PCB Width W "50<=W<65")
Reference
Refer to "5. PCB Backup jig (PCB Width W "50<=W<65")" for details.
PCB Vacuum Jig
The PCB is absorbed and clamped. This is applicable for a thin or a warped PCB.
Note
When a PCB has many through holes, it may not be picked up. In this
case,consult the marketing department or sales agency of Hitachi High-
Technologies for details.
•
PCB Vacuum Jig (PCB Width W "250<=W<=460")
Reference
Refer to "6. PCB Vacuum Jig (PCB Width W "250<=W<=460")" for details.
•
PCB Vacuum Jig (PCB Width W "65<=W<250")
Reference
Refer to "7. PCB Vacuum Jig (PCB Width W "65<=W<250")" for details.
•
PCB Vacuum Jig (PCB Width W "50<=W<65")
Reference
Refer to "8. PCB Vacuum Jig (PCB Width W "50<=W<65")" for details.
1103-002
1OM-1505
6-2
2. Assembling Table : Chap.6
1103-002
2. Assembling Table
The backup jig consists of the following parts. When the jig is created, use the
Part Drawing referring to the assembling table.
PCB Backup Jig
PCB Backup Jig (PCB Width W "250<=W<=460")
-(M900-ZI-001)
-(M900-ZI-001PA)
PCB Backup Jig (PCB Width W "65<=W<250")
-(M900-ZI-003)
-(M900-ZI-003PA)
PCB Backup Jig (PCB Width W "50<=W<65")
-(M900-ZI-005)
-(M900-ZI-005PA)
PCB Vacuum Jig
PCB Vacuum Jig (PCB Width W "250<=W<=460")
-(M900-ZI-002)
-(M900-ZI-002PA)
PCB Vacuum Jig (PCB Width W "65<=W<250")
-(M900-ZI-004)
-(M900-ZI-004PA)
PCB Vacuum Jig (PCB Width W "50<=W<65")
-(M900-ZI-006)
-(M900-ZI-006PA)
1OM-1505
3. PCB Backup Jig (PCB Width W "250<=W<=460") : Chap.6
6-3
W 460 to 250
P W – 41
V W/2 – 43.5
L 510 to 420 420 to 332 332 to 262 262 to 204 204 to 142 142 to 92 92 to 50
A 416 L - 4 200
C 360 290 230 166 120 56 30
D 28
L/2 – 147 L/2 – 117 L/2 – 85
40 7
2 85
E L/2 – 182 L/2 – 62 L/2 – 37 L/2 – 17
S 14
8 L/2 – 62 40
X 43 L/2 – 132 L/2 – 102 L/2 – 41 61
T 330
260 200 78 78
U L/2 – 1
7
Q 6 4
Z 193 L/2 – 1
7
Y L/2 – 17
R L/2 – 210
G 416
T1F1
W : PCB Width
L : PCB Length
3. PCB Backup Jig (PCB Width W "250<=W<=460")
3.1 Dimension Table
1103-002