1OM-1505-004_w - 第20页
Notes on Installation, T ransfer and Maintenance Do not install or transfer the machine on the customer side after shipment. T o ensure perfect operation of the machine, including safety and accuracy , only our install…
Never remove the cap of the solvent tank while the machine is running.
Otherwise, the internal cap may pop out, dispersing industrial alcohol and
causing a personal injury (loss of eyesight, etc.).
When some industrial alcohol spills out of the solvent tank or the pan,
immediately stop the operation, turn off the power supply, and wipe the spills
with a rag, etc.
Do
notbring
suchatankclosetoanyheatofretoevaporatethespiltalcohol
becauseitcancatchreveryeasily.
When the green lamp of the light tower is ON or ickering (ON and OFF), it indicates
that the static machine is in the "Automatic" mode (standby mode). Do not touch any
moving areas of the machine.
In case of a disaster of any kind, earthquake, storm,
ood, fire, or lightning,
immediately stop the machine and turn off the power supply.
Safe-
6
Safety Precautions
1OM-1505
2. Common Precautionary Items
0906-001
Notes on Installation, Transfer and Maintenance
Do not install or transfer the machine on the customer side after shipment.
To ensure perfect operation of the machine, including safety and accuracy, only our
installation service department will install the machine or transfer it to another place.
Only the maintenance work on items described in this ma
nual should be performed by
the customer. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
When an alert label has deteriorated and become illegible
, contact our service
department.
Only a well-trained service person should perform maintenance work carefully
through for the machine in compliance with the instructions.
Before the maintenance work, be sure to turn of
f the power breaker and lock
them with padlocks.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its substitute.
Even when the power breaker is set to "OFF", the primary line is powered,
making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance work.
Residual voltages may remain behind for a few minu
tes in the internal devices
of the machine after power interception.
Before performing maintenance work, wait until the char
ge lamps of the DC power
supply and the servoamplifier go "OFF" in 10 minutes or more after the power breaker
is set to "OFF".
Safe-7
Safety Precautions
1OM-1505
2. Common Precautionary Items
0906-001
3. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Description Pages
There are strong motorized and high-voltage areas
inside the machine. Special caution should be paid not
to touch them. Doing otherwise will cause personal injury
(serious accident).
•
Onlyqualied
maintenancepersonnelshoulddetach
the covers.
•
The machine should be operated with the covers
being attached.
•
If a cover is detached, be sure to reattach it.
•
Be sure to transparent covers before operating the
machine.
•
Do not disengage the interlock mechanism of the
covers.
"2.4" in
"Chapter 1 (Vol.1)"
and "1.1.3" in
"Chapter 3 (Vol. 1)"
With the exception of industrial use alcohol, do not use
cleaning solvents.
In particular, be sure not to use gasoline by mistake as it
ishighlyflammable.
"4.4" in
"Chapter 1 (V
ol.4)"
Alert Indications described as "
DANGER
"
Safe-8
Safety Precautions
1OM-1505
3. Alert Indications in Instruction Manual
0906-001