1OM-1505-004_w - 第22页

Alert Indications described as " W ARNING " Alert Description Pages Be sure to keep the all doors closed to avoid any danger when the automatic operation is started or during the automatic operation. "2.4&…

100%1 / 217
3. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Description Pages
There are strong motorized and high-voltage areas
inside the machine. Special caution should be paid not
to touch them. Doing otherwise will cause personal injury
(serious accident).
•
Onlyqualied
maintenancepersonnelshoulddetach
the covers.
•
The machine should be operated with the covers
being attached.
•
If a cover is detached, be sure to reattach it.
•
Be sure to transparent covers before operating the
machine.
•
Do not disengage the interlock mechanism of the
covers.
"2.4" in
"Chapter 1 (Vol.1)"
and "1.1.3" in
"Chapter 3 (Vol. 1)"
With the exception of industrial use alcohol, do not use
cleaning solvents.
In particular, be sure not to use gasoline by mistake as it
ishighlyflammable.
"4.4" in
"Chapter 1 (V
ol.4)"
Alert Indications described as "
DANGER
"
Safe-8
Safety Precautions
1OM-1505
3. Alert Indications in Instruction Manual
0906-001
Alert Indications described as "
WARNING
"
Alert Description Pages
Be sure to keep the all doors closed to avoid any danger
when the automatic operation is started or during the
automatic operation.
"2.4" in
"Chapter 1 (Vol.1)"
Before performing maintenance work, etc., shut off the
power breaker and lock the power breaker with the
padlock.
"2.5" in
"Chapter 1 (Vol.1)"
Only a well-trained service person should perform
maintenance work carefully through for the machine in
compliance with the instructions.
"1.1" in
"Chapter 1 (Vol.4)"
Before the maintenance work, be sure to turn off the
power breaker and lock them with padlocks.
Designate a person who can have charge of the padlock
key.
If the provided padlock is lost or damaged, purchase its
substitute.
"1.1" in
"Chapter 1 (Vol.4)"
As
industrialalcohol
isflammable,besuretokeepit
awayfromanypossiblesourcesofreasitislikelyto
igniteandstartare.
•
Keepindustrial
alcoholawayfromanyheatofre.
•
Avoidsmokingandusingrewhennearthedevice.
"2.1" in
"Chapter 1 (Vol.4)"
To avoid solvent spills, be sure to use the replenishment
container equipped with a nozzle.
•
If you have spilt solvent by mistake, clean it up with a
rag as soon as possible.
•
Aftercleaning
upthespiltsolvent,conrmthatithas
dried completely and enough ventilation is provided.
After that, turn on the power switch of the machine.
"4.4" in
"Chapter 1 (Vol.4)"
When the cap is loose, the internal lid may blow off,
causing the industrial alcohol to drip out. The spill may
alsocausea
re.
Tighten the cap of the tank securely.
"4.4" in
"Chapter 1 (Vol.4)"
Safe-9
Safety Precautions
1OM-1505
3. Alert Indications in Instruction Manual
0906-001
Alert Indications described as "
CAUTION
"
Alert Description Pages
When the cover lock switch is pressed, the interlock
function of the transparent covers is deactivated. Do not
operate the machine with the lock function deactivated,
except for the setup operation.
"2.3" in
"Chapter 1 (Vol.1)"
Avoidhand
andngerinjuries.
•
Your hand or finger might get caught in the transparent
covers and get injured.
•
Hold the handgrip
firmly and open or close the cover (door
type) slowly
.
"2.4" in
"Chapter 1 (Vol.1)"
When the green lamp of the light tower is ON or ickering
(ON and OFF), it indicates that the static machine is in the
"Automatic" mode (standby mode).
"2.6" in
"Chapter 1 (Vol.1)"
Before starting the automatic operation, check carefully that
there is no person around the machine (especially on the other
side of the machine operation). Make sure that no objects (tools,
parts, etc.) are left behind.
"1.1.4" in
"Chapter 3 (Vol.1)"
The padlock key should be kept in such a way that nobody
except the personnel in charge of maintenance can supervise
it.
"4.3" in
"Chapter 2 (Vol.1)"
Even when the power breaker is set to "OFF", the
primary line is powered, making it possible to cause an
electric shock.
Be sure to completely stop the power supply to the machine
before maintenance work.
"1.1" in
"Chapter 1 (Vol.4)"
Residual voltages may remain behind for a few minutes
in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge
lamps of the DC power supply and the servoamplifier go
"OFF" in 10 minutes or more after the power breaker is set to
"OFF".
"1.1" in
"Chapter 1 (Vol.4)"
Safe-1
0
Safety Precautions
1OM-1505
3. Alert Indications in Instruction Manual
0906-001