1OM-1505-004_w - 第24页
Safe-1 1 Safety Precautions 1OM-1505 3. Alert Indications in Instruction Manual 0906-001 Alert Indications described as " CAUTION " (continuted) Alert Description Pages Industrial alcohol is a highly toxic subs…
Alert Indications described as "
CAUTION
"
Alert Description Pages
When the cover lock switch is pressed, the interlock
function of the transparent covers is deactivated. Do not
operate the machine with the lock function deactivated,
except for the setup operation.
"2.3" in
"Chapter 1 (Vol.1)"
Avoidhand
andngerinjuries.
•
Your hand or finger might get caught in the transparent
covers and get injured.
•
Hold the handgrip
firmly and open or close the cover (door
type) slowly
.
"2.4" in
"Chapter 1 (Vol.1)"
When the green lamp of the light tower is ON or ickering
(ON and OFF), it indicates that the static machine is in the
"Automatic" mode (standby mode).
"2.6" in
"Chapter 1 (Vol.1)"
Before starting the automatic operation, check carefully that
there is no person around the machine (especially on the other
side of the machine operation). Make sure that no objects (tools,
parts, etc.) are left behind.
"1.1.4" in
"Chapter 3 (Vol.1)"
The padlock key should be kept in such a way that nobody
except the personnel in charge of maintenance can supervise
it.
"4.3" in
"Chapter 2 (Vol.1)"
Even when the power breaker is set to "OFF", the
primary line is powered, making it possible to cause an
electric shock.
Be sure to completely stop the power supply to the machine
before maintenance work.
"1.1" in
"Chapter 1 (Vol.4)"
Residual voltages may remain behind for a few minutes
in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge
lamps of the DC power supply and the servoamplifier go
"OFF" in 10 minutes or more after the power breaker is set to
"OFF".
"1.1" in
"Chapter 1 (Vol.4)"
Safe-1
0
Safety Precautions
1OM-1505
3. Alert Indications in Instruction Manual
0906-001
Safe-11
Safety Precautions
1OM-1505
3. Alert Indications in Instruction Manual
0906-001
Alert Indications described as "
CAUTION
" (continuted)
Alert Description Pages
Industrial alcohol is a highly toxic substance.
•
When you use industrial alcohol (solvent), be sure to wear
protective equipment (gloves and apron, etc.) to protect
against spills on exposed skin.
•
Whenever solder paste has adhered to your skin,
immediately remove it with lukewarm water mixed with a
cleaning detergent.
"2.1" in
"Chapter 1 (Vol.4)"
Press the cover lock switch to open the transparent
covers and then perform the operation.
Only the person in charge of maintenance should
perform this operation.
"4.3" in
"Chapter 1 (Vol.4)"
and "4.6" in
"Chapter 1 (Vol.4)"
Be sure to turn off the power supply to the machine before
work.
Only the person in charge of maintenance work should
perform this operation.
"4.4" in
"Chapter 1 (Vol.4)"
Industrial alcohol is likely to ignite if spilt within the machine.
•
Do not put the industrial alcohol on the machine. Otherwise,
you may spill the alcohol by mistake, causing it to
ow into
the inside of the machine.
•
Do not put the industrial alcohol nor the replenishment
container inside the machine.
•
Be sure not to perform replenishment work (supplying
the replenishment container with industrial alcohol) in the
machine.
•
Do not spill industrial alcohol outside the solvent tank
during the replenishment work.
•
If you have spilt solvent by mistake, clean it up with a rag
as soon as possible.
•
After cleaning up the spilt solvent, confirm that it has dried
completely and enough ventilation is provided. After that,
turn on the power switch of the machine.
"4.4" in
"Chapter 1 (Vol.4)"
Safe-12
Safety Precautions
1OM-1505
Alert Indications described as "
CAUTION
" (continuted)
Alert Description Pages
Industrial alcohol leaks are likely to cause fires.
•
Whenever an industrial alcohol leakage is found, turn off
the power switch of the machine immediately.
•
When it is impossible to determine the cause of a leak or
to repair a leak, contact the marketing department or sales
agency of Hitachi High-Technologies.
•
It may be difficult to detect a leakage because industrial
alcohol is a volatile liquid. Be sure to carefully confirm that
there are no traces of leaks around joints, etc.
"4.5" in
"Chapter 1 (Vol.4)"
0906-001
3. Alert Indications in Instruction Manual