1OM-1505-004_w - 第25页
Safe-12 Safety Precautions 1OM-1505 Alert Indications described as " CAUTION " (continuted) Alert Description Pages Industrial alcohol leaks are likely to cause fires. • Whenever an industrial alcohol leakage is…
Safe-11
Safety Precautions
1OM-1505
3. Alert Indications in Instruction Manual
0906-001
Alert Indications described as "
CAUTION
" (continuted)
Alert Description Pages
Industrial alcohol is a highly toxic substance.
•
When you use industrial alcohol (solvent), be sure to wear
protective equipment (gloves and apron, etc.) to protect
against spills on exposed skin.
•
Whenever solder paste has adhered to your skin,
immediately remove it with lukewarm water mixed with a
cleaning detergent.
"2.1" in
"Chapter 1 (Vol.4)"
Press the cover lock switch to open the transparent
covers and then perform the operation.
Only the person in charge of maintenance should
perform this operation.
"4.3" in
"Chapter 1 (Vol.4)"
and "4.6" in
"Chapter 1 (Vol.4)"
Be sure to turn off the power supply to the machine before
work.
Only the person in charge of maintenance work should
perform this operation.
"4.4" in
"Chapter 1 (Vol.4)"
Industrial alcohol is likely to ignite if spilt within the machine.
•
Do not put the industrial alcohol on the machine. Otherwise,
you may spill the alcohol by mistake, causing it to
ow into
the inside of the machine.
•
Do not put the industrial alcohol nor the replenishment
container inside the machine.
•
Be sure not to perform replenishment work (supplying
the replenishment container with industrial alcohol) in the
machine.
•
Do not spill industrial alcohol outside the solvent tank
during the replenishment work.
•
If you have spilt solvent by mistake, clean it up with a rag
as soon as possible.
•
After cleaning up the spilt solvent, confirm that it has dried
completely and enough ventilation is provided. After that,
turn on the power switch of the machine.
"4.4" in
"Chapter 1 (Vol.4)"
Safe-12
Safety Precautions
1OM-1505
Alert Indications described as "
CAUTION
" (continuted)
Alert Description Pages
Industrial alcohol leaks are likely to cause fires.
•
Whenever an industrial alcohol leakage is found, turn off
the power switch of the machine immediately.
•
When it is impossible to determine the cause of a leak or
to repair a leak, contact the marketing department or sales
agency of Hitachi High-Technologies.
•
It may be difficult to detect a leakage because industrial
alcohol is a volatile liquid. Be sure to carefully confirm that
there are no traces of leaks around joints, etc.
"4.5" in
"Chapter 1 (Vol.4)"
0906-001
3. Alert Indications in Instruction Manual
4. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact our service department for
the replacement with a new one.
4. Alert Labels
Safe-13
Safety Precautions
1OM-1505
0906-001