1OM-1505-004_w - 第34页

No Alert Labels and Description (8) CAUTION Description  Hold the door handhold firmly and slowly open or close the door . Otherwise, an injury will result. (9) CAUTION Y our hand might be caught in the moving section. D…

100%1 / 217
No Alert Labels and Description
(5)
CAUTION
Shutdown the power source on the work side when
the breaker primary terminals are to be maintained
or inspected.
Electric Shock Hazard!
Otherwise, it will result in an electric shock.
Description
Power is supplied to the primary line of the power breake
r. Avoid any electric
shock.
When maintenance or inspection of the machine (cleaning, oiling or adjustment,
etc.) is to be performed, it should be performed by the person in char
ge of
maintenance, strictly according to the speci
fied procedure, after shutdown the
power and air and locking the power breaker using a padlock.
When the maintenance and inspections work is performed with the machine
powered, you will be given an electrical shock or suffer an injury.
(6)
CAUTION
Be sure to provide grounding because
much current is leaking. Otherwise,an
electric shock will result.
Electric Shock Hazard!
Description
Before connecting to the breaker's primary power leading-in section, connect
the grounding cable (PE).
Imperfect grounding will cause an electric shock.
(7)
CAUTION
The squeegee might move up or down due to the
fluctuation of air pressure. In such a case, your hand might
be caught. Do not put your hand in the moving section.
Keep your hand away from
the moving range.
Description
The squeegee might move up or down due to the uctuation of air pressure and
your hand might be caught in it.
Do not put your hand in the moving section.
4. Alert Labels
Safe-20
Safety Precautions
1OM-1505
0906-001
No Alert Labels and Description
(8)
CAUTION
Description
Hold the door handhold firmly and slowly open or close the door. Otherwise, an
injury will result.
(9)
CAUTION
Your hand might be caught in the moving section. Do not
put your hand into the cover opening during the machine
operation.
Pay attention to the moving
mechanisms!
Description
Do not put your hand into the cover opening during the machine operation.
Otherwise, your hand may be trapped in the moving mechanisms, causing
injury.
(10)
CAUTION
Your hand might be crushed with the screen clamp.
Do not put your hand under the screen clamp.
Keep your hand away from
the moving range.
Description
Your hand might be crushed with the screen clamp.
Do not put your hand under the screen clamp.
(11)
Description
Otherwise, you might bump against the transparent cover.
Be careful not to bump against the transparent cover.
0906-001
4. Alert Labels
Safe-21
Safety Precautions
1OM-1505
No Alert Labels and Description
(12)
Description
This label indicates that high voltage is applied to the are
a.
Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of the DC
power supply and the servoampli
fi
er go "OFF" in 10 minutes or more after the
power breaker is set to "OFF".
(13)
Description
The temperature on the section with this label is very hig
h.
When you touch the surface, take the greatest care not to get burnt.
(14)
Description
Only trained personnel should operate the machine. Othe
rwise, the machine
may break down.
4. Alert Labels
Safe-22
Safety Precautions
1OM-1505
0906-001