1OM-1505-004_w - 第36页
No Alert Labels and Description (15) Description For transportation, the arms of a fork lift truck or a catch pallet must be inserted from the front side of the machine. If the arms or the catch pallet is inserted from…
No Alert Labels and Description
(12)
Description
This label indicates that high voltage is applied to the are
a.
Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of the DC
power supply and the servoampli
fi
er go "OFF" in 10 minutes or more after the
power breaker is set to "OFF".
(13)
Description
The temperature on the section with this label is very hig
h.
When you touch the surface, take the greatest care not to get burnt.
(14)
Description
Only trained personnel should operate the machine. Othe
rwise, the machine
may break down.
4. Alert Labels
Safe-22
Safety Precautions
1OM-1505
0906-001
No Alert Labels and Description
(15)
Description
For transportation, the arms of a fork lift truck or a catch pallet must be inserted
from the front side of the machine.
If the arms or the catch pallet is inserted from the rear side or the side face of the
machine, the electrically equipped sections may be damaged.
(16)
Description
Be sure to read the instruction manual carefully for correct operations before
use.
An operator's error will break down the machine, causing an injury or a serious
accident.
4. Alert Labels
Safe-23
Safety Precautions
1OM-1505
0906-001
5. Precautionary Items for Correct Operations
Requirements for Installation
Besuretofulllthefollowingrequirementsforsafetypurposes.
•
Overvoltage Category : Category III
•
Pollution Degree : 3
Overvoltage Categories refer to the level of Impulse W
ithstand Voltage protection
provided at the speci
fied Pollution Degree.
Category III : Primary circuits of a device to which power is directly supplied
from the power distribution panel, and circuits from the
distribution panel to outlets.
Note
The term was changed from "Installation Category" to "Overvoltage
Category".
"Pollution Degree" is a degree of pollution severity.
Pollution Degree 3 : Conductive pollution or dry nonconductive pollution that
becomes conductive due to condensation occurs.
To be found in industrial environment or construction sites
(harsh environments).
0906-001
5. Precautionary Items for Correct Operations
Safe-24
Safety Precautions
1OM-1505