1OM-1505-004_w - 第65页
1OM-1505 1-10 2. Names and Functions of Each Section : Chap.1 2.7 Operation Section The touch screen and operation panel that are required to operate the machine, are arranged on the main machine. Note The following oper…
1OM-1505
2. Names and Functions of Each Section : Chap.1
1-9
2.6 Light Tower
Red
Yellow
Green
Buzzer
Light Tower
F1A10
The light tower indicates the status of the machine with the lamps and buzzer
sounds.
•
Lamp Colors (ON Mode)
The machine is factory-adjusted upon shipment.
Lamp Colors (ON Mode) Machine Status
Red
Error (Operation Stopped)
Yellow
Component Shortage (Warning)
Green
Automatic Operation
When the machine is in the standby mode, this lamp
flickers.
T1A2
CAUTION
When the green lamp is ON or flickering (ON and OFF),
it indicates that the static machine is in the "Automatic"
mode (standby mode). Do not touch any moving areas of
the machine.
•
Buzzer
Buzzer Machine Status
Continuous Sound
Emergency Stop
Intermittent Sound
Error
T1A3
Note
The status of the machine corresponding to the parameters specied for each
lamp color and buzzer sound can be changed in the "MAC. SET-UP" window.
Reference
Refer to "5.1 Tower Lamp/Buzzer" in "Chapter 1 (Vol. 3)" for details.
0906-001
1OM-1505
1-10
2. Names and Functions of Each Section : Chap.1
2.7 Operation Section
The touch screen and operation panel that are required to operate the machine, are
arranged on the main machine.
Note
The following operation buttons and switches are arranged in the operation
panel.
[2] [3] [4] [5]
[1]
Operation panel F1A11
[1] Touch Screen
The windows for operations are displayed on the touch screen.
Various operations can be performed by nger-touching the buttons that
appear on the screen.
Reference
Refer to "Short Appendix: Operation Panels and Touch Screens" for how
to handle the touch screens.
[2] [POWER ON] Button
Turning ON or OFF this button supplies or intercepts the power for
operations.
When the [POWER ON] button is pressed and the power for operations is
supplied, the LED of the [START] button flickers.
[3] [START] Button
When the [START] button is pressed while the lamp is fl
ickering after the
machine is powered, the automatic operation starts and the LED of the button
turns green.
While the LED is ON, it indicates that the automatic operation is being
performed.
When the [STOP] button is pressed during the automatic operation, the
automatic operation stops temporarily and the lamp of the [START] button
extinguishes.
While each device is being zeroed, the LED is kept ON.
1002-002
1OM-1505
2. Names and Functions of Each Section : Chap.1
1-111002-002
[4] [STOP] Button
When this button is pressed, the machine stops running temporarily.
When the machine is running automatically, it stops temporarily after all the
picked components are placed.
When the [STOP] button is pressed during the zeroing operation, the zeroing
operation of each device is interrupted.
[5] [EMERGENCY STOP] Switch
Press this switch to immediately stop the machine in an emergency.
When this switch is pressed, the machine stops running immediately and the
[POWER ON] button on the operation panel illuminates in red.