1OM-1505-004_w - 第94页

1OM-1505 2. Operation Window : Chap.2 2-9 2.1 Control Menu When the [CTRL] button is pressed, the "CTRL MENU" window appears. [1] [2] [3] [5] [6] [4] F1B8 In the "CTRL MENU" window, the buttons for ba…

100%1 / 217
1OM-1505
2-8
2. Operation Window : Chap.2
1002-002
[6] Operation / Display Section
Device Image, Operation Buttons and Related Data are displayed. The
displayed data is different in each the operation window.
[7] Tab and Tab sheet
When the window consists of two or more tab sheets, there are tabs or
buttons on the upper sections of the window. On the tab, the name of the
sheet is indicated. When the tab is pressed, the sheet (tab sheet) appears.
[8] Status Bar
The Login Type, Window No. Current Date and Time are displayed on the
status bar.
1OM-1505
2. Operation Window : Chap.2
2-9
2.1 Control Menu
When the [CTRL] button is pressed, the "CTRL MENU" window appears.
[1]
[2]
[3]
[5]
[6]
[4]
F1B8
In the "CTRL MENU" window, the buttons for basic operations are arranged in a
group.
[1] [All Axis Origin] Button
When this button is pressed, this button and the [START] button on the
operation panel flash for 10 seconds.
When the [START] button on the operation panel is pressed while the button
is flashing, all axes except for that for the conveyor width, are zeroed.
[2] [Stencil Recog] Button
When this button is pressed, this button and the [START] button on the
operation panel fl
ash for 10 seconds.
When the [START] button on the operation panel is pressed while the button
is flashing, the stencil recognition is executed.
[3] [Stencil Shelter] Button
When this button is pressed, this button and the [START] button on the
operation panel fl
ash for 10 seconds.
When the [START] button on the operation panel is pressed while the button
is flashing, the stencil sheltering operation is executed.
1002-002
1OM-1505
2-10
2. Operation Window : Chap.2
0906-001
[4] [Unit Return] Button
When this button is pressed, this button and the [START] button on the
operation panel flash for 10 seconds.
When the [START] button on the operation panel is pressed while the button
is flashing, each unit is returned to the printing position.
[5] [USB Flacg drv. removal] Button
This button is used when the USB memory is removed.
After pressing this button and conrming that the USB memory lamp is
turned OFF, remove the USB memory stick.
[6] PCB Move
[L Conveyor] Button
[Table] Button
[R Conveyor] Button
Wh
en the button for the PCB transfer destination is pressed and the [START]
button on the control panel is pressed, the PCB is transferred to that
destination.
When there is no PCB in the machine, this button is unavailable. When the
[Table] button is pressed, while there is a PCB both on the output conveyor
and input conveyor, the PCB on the input conveyor is transferred to the table.