1OM-1505-004_w - 第96页

1OM-1505 2. Operation Window : Chap.2 2-1 1 2.2 Recognition Window In the "Recognition" window the display pattern is designated to impose-display the recognition image on the operation window indicated on the …

100%1 / 217
1OM-1505
2-10
2. Operation Window : Chap.2
0906-001
[4] [Unit Return] Button
When this button is pressed, this button and the [START] button on the
operation panel flash for 10 seconds.
When the [START] button on the operation panel is pressed while the button
is flashing, each unit is returned to the printing position.
[5] [USB Flacg drv. removal] Button
This button is used when the USB memory is removed.
After pressing this button and conrming that the USB memory lamp is
turned OFF, remove the USB memory stick.
[6] PCB Move
[L Conveyor] Button
[Table] Button
[R Conveyor] Button
Wh
en the button for the PCB transfer destination is pressed and the [START]
button on the control panel is pressed, the PCB is transferred to that
destination.
When there is no PCB in the machine, this button is unavailable. When the
[Table] button is pressed, while there is a PCB both on the output conveyor
and input conveyor, the PCB on the input conveyor is transferred to the table.
1OM-1505
2. Operation Window : Chap.2
2-11
2.2 Recognition Window
In the "Recognition" window the display pattern is designated to impose-display
the recognition image on the operation window indicated on the touch screen.
When the [Recog] button is pressed on the common menu bar, the "Camera
Monitor" window is displayed using the "multiple window" format.
[1]
[2]
[3]
F1B9
1002-002
1OM-1505
2-12
2. Operation Window : Chap.2
0906-001
[1] "Recognition Camera" Window
An image captured by the PEC or the stencil recognition camera is displayed
in real time.
Whenever the [RECOG.] button on the main menu bar is pressed, the
"Recognition Camera" window appears or disappears.
Note
(a) A camera can be selected in the "MAN. SUB-SYS" window
(submenu). (Operation Sequence: [MAINT.] Button
→
[MAN. SUB-
SYS] Button
→
"Recog. Block" Tab Sheet)
(b) When the "Recognition Camera" window is pressed twice in rapid
succession, a toolbar appears or disappears.
[2] Toolbar
A collection of icons (buttons) are arranged on the toolbar.
Command Menus Function Icons
Zoom In Press this icon to increase the size of the "Recognition
Camera" window. The displayed image is also magnied
according to the change of the window size.
Zoom Out Press this icon to decrease the size of the "Recognition
Camera" window. The displayed image is also reduced
according to the change of the window size.
Zoom Back Press this icon to resume the previous window size (the size
before the "Recognition Camera" window is magnied or
reduced).
T1B1
[3] Window Size Change Mode Selection Bar
This bar is used to determine whether or not the display size of the
"Recognition Camera" window should be changed.
Note
Pressing this bar twice in rapid succession turns on or off the function to
change only the magnication of the captured item (not the size of the
"Recognition Camera" window).