DECAN_S2_Admin(Eng_Ver4.5).pdf - 第218页

7-53 Part Registration 7.1.2.5. Trimmer component data setting Set align data for T r immer com p onents. Figure7.17 “P ackage Group =Tr immer” dialog box  <Camera No.> combo box Select the camera to r ecognize th…

7-52

Advanced Chip Shooter DECAN S2 Administrator’s Guide

Memo Register the part with its image the same as the following as TR2 and

have the 3 leads recognized except for the lead at the center.

 Selected for use with the inspection function when parts registered as TR flip over.

7-53

Part Registration

7.1.2.5. Trimmer component data setting

Set align data for Trimmer components.

Figure7.17 “Package Group =Trimmer” dialog box

 <Camera No.> combo box

Select the camera to recognize the component. Please refer to “7.1.1 Common Align

Data” for more information.

 button

Set the light for the camera to recognize the component. Please refer to“7.1.1

Common Align Data” for more information.

 <Size> group

Set the Align size.

 <Body X> edit box

Set the component size in X direction.

 <Body Y> edit box

Set the component size in Y direction.

 <Up Lead L> edit box

Set the component size in Y direction.

 <Down Lead L> edit box

Set the length of the lower lead in Y direction.

For other setups, please refer to“7.1.1 Common Align Data”.

7-54

Advanced Chip Shooter DECAN S2 Administrator’s Guide

Memo In the following cases, the ‘flip check’ function cannot be used.

 The top and bottom shapes of the part are the same.

 The image of the top and bottom surfaces is not contrasted

clearly.

 <Option> group

Set the align option data.

 <Rough Check> check box

When recognizing a part, if a recognition error occurs because the shape of the

part to be recognized does not match with the vision algorithm data, select this

check box.

If this check box is selected, even if a certain shape of the part to be recognized is

more or less incorrect when compared with the vision algorithm data, the part is

recognized correctly in case it is identical when checking the layout of the entire

parts.

Please refer to “7.1.1 Common Align Data” for more information.

 <Move> button

Performs component pickups or moves to the stage camera. Please refer to “7.1.1

Common Align Data” for more information.

 <Test> button

Tests component recognition by using the set align data. Please refer to “7.1.1

Common Align Data” for more information.

 <Image Capture> button

Helps to specify the optimum lighting value. The lighting is gradually changed

automatically and the images are saved. The user can check the best image and

identify the optimum lighting value. Please refer to“7.1.1 Common Align Data” for

more information.