DECAN_S2_Admin(Eng_Ver4.5).pdf - 第270页

8-13 Feeder Setup  <Display> butt on Displays the sh ape of the feeder that is installed on the feeder base grap hi cally .  <Cancel> button Close the dialog box .

8-12

Advanced Chip Shooter DECAN S2 Administrator’s Guide

head and click this button.

 <Installed Feeder Only> check box

Shows only the list of the feeders installed in the grid cell group for feeders.

 <Part Outline> check box

If this check box is selected, when the fiducial camera is moved to the position of the

corresponding feeder to check the pickup position, the outline image that considers the

angle at which the corresponding part is picked up is displayed on the SMVision

window.

 <Offset  Part> button

Selected when applying the pickup offset to the same tape feeder collectively after

changing the pickup coordinate of the installed tape feeder.

 <Part  Offset> button

Clicking this button will automatically reflect the pickup offset of the corresponding

part on the pickup coordinate when there are parts with pickup offset among the parts

supplied by the currently installed tape feeders.

 <Enable Home Offset> button

When this check box is selected, the MMI reads the Y offset value from the IT Feeder

System and corrects the Y coordination of the pickup point. Therefore, this function

can be used only when the IT Feeder System and Device Net board are installed in the

machine.

8-13

Feeder Setup

 <Display> button

Displays the shape of the feeder that is installed on the feeder base graphically.

 <Cancel> button

Close the dialog box.

8-14

Advanced Chip Shooter DECAN S2 Administrator’s Guide

8.1.2. Stick Unit

Install stick feeder and set data on the stick feeder. When “Stick Unit” is selected, the

initial screen looks as follows.

Figure8.5 “Stick Unit” dialog box

1: Grid group

 <Grid> group

Create and edit data according to the stick unit type selected in the <Type> combo

box.

 <No> column

A serial number of the stick unit slots. The number of slots of the stick feeder is as

follows. Serial number is created depending upon the number of slots.

 Multi Stick - Max. 10 sets

Feeds up to 10 parts at a time.

 <Part> column

Select the part to install in the corresponding slot. When the <Part> column is

clicked on, a combo box is displayed, and of the components registered in <1.2

Part>, a list of parts to be supplied to “Stick” are displayed. Select the component

to install in this list. Next is a screen showing component selection in the combo

box of <Part> column.