2OM-1751-003w_G5S - 第126页

2OM-1751 2-4 1303-001 2. Composition of Pattern Program The pattern program is composed of the following data. Pattern Program (Chapter 2) Pattern Program Common SET (3.1) PCB (3.2) Operation (3.3) Control (3.4) PL Head/…

100%1 / 380
2OM-1751
2-31303-001
[3] Tool Bar
The operation commands that can be executed in the data edit window, are
collectively displayed as icons.
Icons Description
When selected, the data is checked.
Whether or not the data is completed, is checked.
When selected, the data is optimized.
Note
When pressed, the machine components are searched.
When selected, the data within the selectable range is
cutout.
When selected, an empty line is added to the last portion.
An empty line is added to the last line.
When selected, an empty line is added to the cursor
position.
An empty line is added to any position.
When selected the current le is saved.
The le currently in the course of editing, is saved.
In the case of new le, the le is to be saved with a new
name.
When selected, the le is saved with a new name.
The le currently in the course of editing, is saved with a
new name.
When selected, the window is returned.
The "Product." window is returned.
T2B2
[4] Data Edit Window
The ten-key pad or list selection buttons appropriate for the data selected in
the pattern program menu, are displayed in this window.
[AC] Button :
When pressed, the data in the course of the entry operation,
is cleared.
[BS] Button :
When pressed, a backspace is given to the data in the course
of the entry operation.
[Bk.] Button
[Fr.] Button :
When pressed, the displayed window is changed.
[Set] Button :
When pressed, the entered numerical value or selected item
is set.
1. Outline of Pattern Program
2OM-1751
2-41303-001
2. Composition of Pattern Program
The pattern program is composed of the following data.
Pattern Program (Chapter 2)
Pattern Program
Common SET (3.1)
PCB (3.2)
Operation (3.3)
Control (3.4)
PL Head/Nozzle (3.5)
CMPNT PL (3.6,F01)
Component Library
Component ID
Placement (3.7,G01)
HDLG/PL (3.8)
Function Data (C01)
PEC Recognition Mark Data (C02)
Operation Data (C03)
Setup Data (C04)
Control Data (D01)
PCB Locate Data (D02)
Transfer Speed Data (D03)
Nozzle Place Data (E01)
Block 1(2)
Nozzle Stk 1 Data (E02)
Offset (G02)
P-Data (G03)
O-Data (G04)
Un
Support Pin Data (C05)
PCB Recog
Set-up
Nozzle Stk 2 Data (E02)
Note
(3.1) to (3.8) and (B01) to (G04) show the Nos. to be referred to.
F2B2
2. Composition of Pattern Program
2OM-1751
2-51303-001
2.1 Composition of Common SET
Note
This data is used in the dual transfer operation (option).
2.2 Composition of PCB Data
The set parameters are used to set the PCB size and reference, etc.
Items Ref. No.
PCB Size
X (Horizontal), Y (Vertical), T (Thickness) [mm]
B01_01
PCB origin offset
X (Horizontal), Y (Vertical) [mm], Z (Angle) [deg],
X/Y Coordinate Angle [deg],
X-Direction, Y-Direction, Z-Direction
B01_02
PCB height offset B01_03
PCB Positioning Reference B01_04
Complibrary placement offset B01_05
PCB Warpage B01_06
Lot Name B01_07
Comment 1 and Comment 2 B01_08
T2B3
2.1 Composition of Common SET