2OM-1751-003w_G5S - 第205页
2OM-1751 3-1 1 1303-001 1.2.7 Property of Component ID Procedure (1) Select the component ID to view its property . (2) Press the [Property ...] button. (The "Property" dialog box.) [1] [2] [3] [4] [5] [6] F2C1…
2OM-1751
3-101303-001
1.2.6 Merging the Component ID
Procedure
(1) Select the desired root component ID.
(The selected component ID turns blue, indicating that it is selected.)
F2C10
(2) Press the [Merge...] button.
(The "Merge" dialog box opens.)
F2C11
(3) Enter the component ID name to be merged in the "Equalized Component
ID:" text box and press the [OK] button.
(The component ID is merged.)
Note
The merging function makes it possible to set a registered component ID
as a link ID for another root component.
Notice
The information on the component ID (component library data)
to be merged becomes the same as the information on the root
component ID (component library data).
1.2 Basic Operations in "Selection of component ID" Window
2OM-1751
3-111303-001
1.2.7 Property of Component ID
Procedure
(1) Select the component ID to view its property.
(2) Press the [Property...] button.
(The "Property" dialog box.)
[1]
[2]
[3]
[4] [5] [6]
F2C12
[1] "Component ID", "Root ID", "Component shape", "Component type",
"Serial No.", "Update Time", and "Saved by"
Displayed is the property of the selected component ID.
[2] Placeable Data (Unident., OK, NG, ?)
It can be displayed as log data to be checked if the machine (SIGMA-G4/G5)
can place this component or not.The check boxes can be used to change the
function.
1.2 Basic Operations in "Selection of component ID" Window
2OM-1751
3-121303-001
[3] Attributes (Protect, Common, Std Id)
Displayed are the attributes of the selected component ID.The check boxes
enable the operator to change the corresponding attributes.
"Protect"
When this check box is ticked, the component ID is specied as "Protected".
When a component ID is protected, the data cannot be edited.
"Common"
When this check box is ticked, the component ID is specied as "Common" (to
be registered as a common component).
Note
The [Common] button in a "Component Library" edit window also makes
it possible to set the selected component as one to be registered as a
common component. Refer to "1.3 Component Library Edit" window for
details.
[4] [OK] Button
When this button is pressed, the changed attributes are applied if any and the
"Property" sheet closes.
[5] [Cancel] Button
The changed attributes are not applied and the "Property" sheet closes.
[6] [Apply] Button
The changed attributes are applied.
1.2 Basic Operations in "Selection of component ID" Window