2OM-1751-003w_G5S - 第217页
2OM-1751 4-3 1303-001 [3] Information on T otalization File This eld displays "Clear Date" and "Comment". [Comment] Button When this button is pressed, the "String Key" window appears. In t…
2OM-1751
4-21303-001
2. "MNG.DT." Window
The corresponding window enables the operator to conrm the production
performance data covering the whole machine performance.
Note
The contents of "Type #1" are almost the same as "Type #2". To use the required
items, the management spans must be distinguished.
[2]
[3]
[4]
[1]
F2D2
[1] Tabs and Tab Sheets
The "MNG.DT." window is provided with the following four tabs. When
each tab is pressed, the corresponding tab sheet appears inside the window.
Buttons Description
Mach.Prfrm,
The corresponding tab sheet enables the operator to view various counts
(results of accumulated data) as machine performance data.
FdrMng.
The corresponding tab sheet enables the operator to view the pickup
data of each individual feeders.
NozMng.
The corresponding tab sheet enables the operator to view various counts
(results of accumulated performance data) of each individual nozzles.
Handling/Plac.
The corresponding tab sheet enables the operator to view the component
pickup and placement data.
T2D2
[2] [Clear] Button
When this button is pressed, all the data items in "Type #1" or "Type #2" in
the "MNG.DT." are cleared and the revision date and time are changed.
Graphic
Development
2. "MNG.DT." Window
2OM-1751
4-31303-001
[3] Information on Totalization File
This eld displays "Clear Date" and "Comment".
[Comment] Button
When this button is pressed, the "String Key" window appears. In this
window, the comment for "Type #1" or "Type #2" can be input.
[4] [Type #1] and [Type #2] Button
This icon displays the "Type #1" or "Type #2" window.
2. "MNG.DT." Window
2OM-1751
4-41303-001
2.1 "Mach.Prfrm," Tab Sheet
When the [Mach.Prfrm,] tab is pressed in the "MNG.DT." window, the following
tab sheet appears inside the window.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
"Mach.Prfrm," Tab Sheet (1/5) F2D3
[1] PCB counter
Shown is the number of produced PCBs.
Counting is implemented when the X/Y table is zeroed after component
placement operation (when a PCB is nished).
Note
When a particular pattern program is set several times as current one, the
sum total is computed.
[2] Product PCB
The number of produced unit PCBs on multi-unit PCB is summed up.
Counting is implemented when the X/Y beam is zeroed after component
placement operation (when a unit is nished).
When the bad board reject (BBR) function is used, defective unit PCBs are
excluded.
[3] Passed PCB
The number of passed PCBs is counted when the machine is set in the
"PASS" mode.
Counting is implemented when the PCB transfer starts (when the PCB on the
PCB positioning section is transferred to the output conveyor).
[4] Product PCB (BBR)
Shown is the number of defective PCBs summed up when the bad board
reject function (option) is used.
2.1 "Mach.Prfrm," Tab Sheet