2OM-1751-003w_G5S - 第317页
2OM-1751 6-45 1303-001 7.3 "COMP RCG" T est Window The corresponding tab sheet enables the operator to test to check that the component designated in the Test ID, is recognized normally. F2F44 The "COMP RC…
2OM-1751
6-44
(6) When new placement position is to be registered formally, press the [End]
button.
(The "Conrmation to Saving" window will appear ("If a data has no
temporal registration, the teaching result cannot be saved").)
F2F41
To replace the current pattern program data with the new one ("Save"
Command)
When the [Yes] button is pressed in the "Conrmation to Saving" window,
the "Conrmation to Saving" message is displayed ("Overwrite data. Is it
OK?")
F2F42
Maintaining the Current Pattern Program Data (Save As)
When the [No] button is pressed in the "Conrmation to Saving" message
window ("Overwrite it. Is it OK?"), the "String key" window appears.
Enter new le name and press the [Set] button.
The temporarily entered pattern program will be saved with the newly
entered le name.
F2F43
Deleting the Teach Data (All Teach Data Delete)
Press the [No] button in the "Conrmation to Saving" window ("Would you
like to save the data registered temporarily to the pattern program?
(If the data has not temporal registration, the teaching result cannot be
saved)").
1303-001
7.2 "Place Pos Teach" Window
2OM-1751
6-451303-001
7.3 "COMP RCG" Test Window
The corresponding tab sheet enables the operator to test to check that the
component designated in the Test ID, is recognized normally.
F2F44
The "COMP RCG" test window is provided with the following tab sheet.
Tabs Description
Select from list
The corresponding tab sheet enables the operator to test to check that the
component designated in the Test ID, is recognized normally.
Sel. from CompDt
The corresponding tab sheet enables the operator to test to check that the
component is recognized normally by means of designating the Test ID
used in the block.
Library Teaching
New Creation
The corresponding tab sheet enables the operator to create new
component library teaching data.
T2F2
Graphic
Development
7.3 "COMP RCG" Test Window
2OM-1751
6-461303-001
7.3.1 "Select from list" Tab Sheet
When the [Select from list] tab is pressed in the "COMP RCG" test window, the
following tab sheet appears.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
F2F45
[1] Test ID Selection Tabs
ALL :
When this tab is selected, all the test IDs are displayed.
A to Z :
When this tab is selected, the test IDs with an alphabetical rst
character, are displayed.
0 to 9 :
When this tab is selected, the test IDs with a numerical rst
character, are displayed.
Mark :
When this tab is selected, the test IDs with a symbolic rst
character, are displayed.
[2] Test ID Display Change Tabs
Using these tabs, the indication in the Test ID List is changed.
Time order :
When this tab is selected, the test IDs are displayed in the
order of saving date starting from new one.
Alph order :
When this tab is selected, the test IDs are displayed in
alphabetical order.
[3] Component ID List
The test ID for which the component recognition test is performed, is
selected in this pane.
Graphic
Development
7.3 "COMP RCG" Test Window