2OM-1751-003w_G5S - 第320页

2OM-1751 6-48 1303-001 7.3.2 "Sel. from CompDt" T ab Sheet When the [Sel. from CompDt] tab is pressed in the "COMP RCG" test window, the following tab sheet appears. [1] [2] [3] [4] F2F46 [1] T est ID…

100%1 / 380
2OM-1751
6-471303-001
[4] Page Change Button
[
] Button
: When pressed, the top page is displayed.
[ ] Button
: When pressed, the previous page is displayed.
[ ] Button
: When pressed, the next page is displayed.
[ ] Button
: When pressed, the last page is displayed.
[5] [Edit] Button
When this button is pressed, the test ID selected in [3] is edited.
Reference
Refer to "Component Library" in "Chapter 3", for the editing procedure.
[6] [Delete] Button
When this button is pressed, the component ID selected in [3] is deleted.
[7] [Add to Comp ID] Button
When this button is pressed, the test ID edited in [5] is registered in the
component ID list.
[8] [Copy from Comp ID] Button
When this button is pressed, the component ID is copied and inserted in the
Test ID list.
[9] [Fr.] Button
When this button is pressed, the component recognition test for the test ID
selected in [3], is performed.
Reference
Refer to "7.3.4. Component Recognition Test Execution" for the editing
procedure.
7.3 "COMP RCG" Test Window
2OM-1751
6-481303-001
7.3.2 "Sel. from CompDt" Tab Sheet
When the [Sel. from CompDt] tab is pressed in the "COMP RCG" test window,
the following tab sheet appears.
[1]
[2]
[3]
[4]
F2F46
[1] Test ID Selection Tabs
The corresponding tab sheet enables the operator to display the test IDs
registered for the block selected in [3].
[2] Page Change Button
[
] Button
: When pressed, the top page is displayed.
[ ] Button
: When pressed, the previous page is displayed.
[ ] Button
: When pressed, the next page is displayed.
[ ] Button
: When pressed, the last page is displayed.
[3] [Select block] Button
Using this button, the block is selected.
[4] [Edit] Button
When this button is pressed, the test ID selected in [1] is edited.
Reference
Refer to "Component Library" in "Chapter 3", for the editing procedure.
7.3 "COMP RCG" Test Window
Graphic
Development
2OM-1751
6-491303-001
7.3.3 "Library Teaching New Creation" Tab Sheet
On this tab sheet, the initial data parameter entry is performed for the data to be
created newly.
When the [Library Teaching New Creation] tab is pressed in the "COMP RCG"
window, the following tab sheet is displayed.
Note
On this tab sheet, enter the parameters for "T" (Thickness), "t" (Thickness" and
"Ut" (Thickness). If this setting is not performed, the procedure does not go to
the next step.
Reference
Refer to "Vol. 6 Component Library" for the description of each item.
[1]
[2]
[4]
[5]
[6]
[3]
F2F47
[1] [Comp ID] Button
In this data box, the component ID to be created is entered.
Note
Enter the component ID. If this setting is not performed, the procedure
does not go to the next step.
[2] [Comment] Button
The comment for the component can be entered in this text box.
[3] Input Data Change Button
[Shape Data]
The shape data entry window is displayed.
[Control Data]
The control data entry window is displayed.
7.3 "COMP RCG" Test Window
Graphic
Development