2OM-1751-003w_G5S - 第328页
2OM-1751 6-56 [7] [Img Save] Button When this button is pressed, the "Img Save" window appears. This window is used to save the test results. [8] [Noz Chg] Button When this button is pressed, the "NOZ.CHG.…
2OM-1751
6-551303-001
[
] button
: Using this button, the image displayed within the display
domain in the Recognition Window can be moved to the
position where the image is to be displayed.
[
] button
: When selected, this button displays a crosshair indicates the
center of the camera.
[3] Recognition Display Section
The recognition results are displayed in this pane.
[4] Operation Buttons (First Page)
Pick-up mode
Feeder :
This mode is selected when the component is picked up from
each feeder automatically and the test is performed.
Mnl. :
This mode is selected when the component is attached to the
nozzle manually and the test is performed.
When the [Fr.] button is pressed, the head on the XY beam
specied using the "Head Sel" button, is moved to the center
position (home position) and the nozzle of which No. has been
specied in "Noz select" button, is moved (turned) to this side.
Head Sel
The buttons showing each head are displayed using images.
Using one of these buttons, the head to be used for the component
recognition test is selected.
Feeder No.
Using this button, the feeder to be used to pick-up the test component is
selected.
When this button is pressed the "Test ID Select" window appears.
Noz select
Using this button, the nozzle to be used for the recognition test is selected.
When this button is pressed, the "Nozzle No." selection window appears.
[Fr.] Button
When this button is pressed, the next page appears.
[5] Test Result
When this button is pressed, the component recognition test results are
displayed.
[6] [Edit] Button
When this button is pressed, the test ID selected in [1] is edited.
Reference
Refer to "Component Library" in "Chapter 3", for the editing procedure.
7.3 "COMP RCG" Test Window
2OM-1751
6-56
[7] [Img Save] Button
When this button is pressed, the "Img Save" window appears.
This window is used to save the test results.
[8] [Noz Chg] Button
When this button is pressed, the "NOZ.CHG." window appears.
Reference
Refer to "5. "NOZ.CHG." Window" for the details of the "NOZ.CHG."
window.
[9] [Bk.] Button
When this button is pressed, the "COMP RCG" test window is returned.
•
Component Recognition Test Execution Window (Second Page)
[10]
F2F54
[10] Operation Buttons (Second Page)
Tape Feed
[Enable] Button :
When this button is pressed, the tape is fed when the test
component is picked up from the feeder.
[Disable] Button :
When this button is pressed, the page is not fed when
the test component is picked up from the feeder.
[Pick-up] Button
This button is used to take out the component automatically from the feeder.
When this button is pressed and within 10 seconds, the [START] button on
the operation panel is pressed, the head in the block selected using the "[4]
Head Sel" button, is moved to the position of the feeder of which No. has
been selected using the [4] Feeder No." button and the component is picked
up.
1303-001
7.3 "COMP RCG" Test Window
2OM-1751
6-571303-001
[Recog] Button
When this button is pressed the within 10 seconds, the [START] button on
the operation panel is pressed, the head in the block selected using the "[4]
Head Sel" button, is moved to the component recognition camera position
and the component recognition is executed.
[Teach] Button
This button is selected when new component library registration is
performed.
Reference
Refer to ""Execution Teach" Window" in chapter 6, Vol.2, in the
Instruction Manual for the Main Machine for the details.
[Hysteresis] Button
The component deviation in the pick-up operation can be tested using this
"Hysteresis test" button, When this button is pressed, the "Hysteresis Test"
window appears.
[Dscd] Button
When this button is pressed, the component is discharged according to the
component library data.
[Collect.] Button
When this button is pressed and within 10 seconds, the [START] button on
the operation panel is pressed, the head is move to the lane No. specied
using the "Coll. Pos" button.
[Vac. Off] Button
Using this button, the vacuum ON/OFF for the nozzle is changed over.
Depending on the current vacuum condition, the left indication of the "Vac.
Off" button is changed to "Vac Pick-up OFF/Vac Pick-up ON".
[Bk.] Button
When this button is pressed, the previous page appears.
[ZERO] Button
When this button is pressed, all the axes of the selected XY beam are zeroed.
Coll.Pos
Using this button, the test component collection position is specied.
7.3 "COMP RCG" Test Window